Guide to the Secure Configuration of Ubuntu 20.04

with profile CIS Ubuntu 20.04 Level 1 Server Benchmark
This baseline aligns to the Center for Internet Security Ubuntu 20.04 LTS Benchmark, v1.0.0, released 07-21-2020.
This guide presents a catalog of security-relevant configuration settings for Ubuntu 20.04. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Evaluation Characteristics

Evaluation targettfm-ubuntu01
Benchmark URL/tmp/tmp.8a8X6EiOz9/input.xml
Benchmark IDxccdf_org.ssgproject.content_benchmark_UBUNTU_20-04
Profile IDxccdf_org.ssgproject.content_profile_cis_level1_server
Started at2023-03-25T10:35:06
Finished at2023-03-25T10:36:35
Performed byssierrago

CPE Platforms

  • cpe:/o:canonical:ubuntu_linux:20.04::~~lts~~~

Addresses

  • IPv4  127.0.0.1
  • IPv4  10.1.11.6
  • IPv6  0:0:0:0:0:0:0:1
  • IPv6  fe80:0:0:0:250:56ff:feb9:cc0e
  • MAC  00:00:00:00:00:00
  • MAC  00:50:56:B9:CC:0E

Compliance and Scoring

The target system did not satisfy the conditions of 89 rules! Furthermore, the results of 2 rules were inconclusive. Please review rule results and consider applying remediation.

Rule results

101 passed
89 failed
4 other

Severity of failed rules

3 other
9 low
73 medium
4 high

Score

Scoring systemScoreMaximumPercent
urn:xccdf:scoring:default63.642525100.000000
63.64%

Rule Overview

Group rules by:
TitleSeverityResult
Guide to the Secure Configuration of Ubuntu 20.04 89x fail 2x error 2x notchecked
System Settings 64x fail 2x error 2x notchecked
Installing and Maintaining Software 4x fail 2x error
System and Software Integrity 3x fail
Software Integrity Checking 3x fail
Verify Integrity with AIDE 3x fail
Install AIDEmedium
fail
Build and Test AIDE Databasemedium
fail
Configure Periodic Execution of AIDEmedium
fail
Disk Partitioning 1x fail
Ensure /tmp Located On Separate Partitionlow
fail
GNOME Desktop Environment
Remove the GDM Package Groupmedium
notapplicable
Sudo 2x error
Install sudo Packagemedium
pass
Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo use_ptymedium
error
Ensure Sudo Logfile Exists - sudo logfilelow
error
Account and Access Control 20x fail
Warning Banners for System Accesses
Verify Group Ownership of System Login Bannermedium
pass
Verify Group Ownership of Message of the Day Bannermedium
pass
Verify ownership of System Login Bannermedium
pass
Verify ownership of Message of the Day Bannermedium
pass
Verify permissions on System Login Bannermedium
pass
Verify permissions on Message of the Day Bannermedium
pass
Protect Accounts by Configuring PAM 10x fail
Set Lockouts for Failed Password Attempts 2x fail
Limit Password Reusemedium
fail
Set Deny For Failed Password Attemptsmedium
fail
Set Password Quality Requirements 7x fail
Set Password Quality Requirements with pam_pwquality 7x fail
Ensure PAM Enforces Password Requirements - Minimum Digit Charactersmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Lowercase Charactersmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Different Categoriesmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Lengthmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Special Charactersmedium
fail
Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Sessionmedium
fail
Ensure PAM Enforces Password Requirements - Minimum Uppercase Charactersmedium
fail
Install pam_pwquality Packagemedium
fail
Protect Accounts by Restricting Password-Based Login 4x fail
Set Account Expiration Following Inactivitymedium
fail
Set Password Expiration Parameters 2x fail
Set Password Maximum Agemedium
fail
Set Password Minimum Agemedium
fail
Set Existing Passwords Maximum Agemedium
pass
Set Existing Passwords Minimum Agemedium
pass
Verify Proper Storage and Existence of Password Hashes
Verify All Account Password Hashes are Shadowed with SHA512medium
pass
Prevent Login to Accounts With Empty Passwordhigh
pass
Verify No netrc Files Existmedium
pass
Restrict Root Logins 1x fail
Verify Only Root Has UID 0high
pass
Ensure that System Accounts Do Not Run a Shell Upon Loginmedium
pass
Enforce usage of pam_wheel for su authenticationmedium
fail
Secure Session Configuration Files for Login Accounts 6x fail
Ensure that No Dangerous Directories Exist in Root's Path
Ensure that Root's Path Does Not Include World or Group-Writable Directoriesmedium
pass
Ensure that Users Have Sensible Umask Values 4x fail
Ensure the Default Bash Umask is Set Correctlymedium
fail
Ensure the Default C Shell Umask is Set Correctlymedium
fail
Ensure the Default Umask is Set Correctly in login.defsmedium
fail
Ensure the Default Umask is Set Correctly in /etc/profilemedium
fail
Ensure the Default Umask is Set Correctly For Interactive Usersmedium
pass
Set Interactive Session Timeoutmedium
fail
User Initialization Files Must Be Group-Owned By The Primary Usermedium
pass
User Initialization Files Must Be Owned By the Primary Usermedium
pass
All Interactive Users Home Directories Must Existmedium
pass
All Interactive User Home Directories Must Have mode 0750 Or Less Permissivemedium
fail
AppArmor 1x fail
Ensure AppArmor is enabled in the bootloader configurationmedium
fail
GRUB2 bootloader configuration 2x fail
Non-UEFI GRUB2 bootloader configuration 2x fail
Verify /boot/grub/grub.cfg User Ownershipmedium
pass
Verify /boot/grub/grub.cfg Permissionsmedium
fail
Set Boot Loader Password in grub2high
fail
UEFI GRUB2 bootloader configuration
Set the UEFI Boot Loader Passwordhigh
notapplicable
Configure Syslog 1x fail
Rsyslog Logs Sent To Remote Host 1x fail
Ensure Logs Sent To Remote Hostmedium
fail
Ensure rsyslog is Installedmedium
pass
Enable rsyslog Servicemedium
pass
Network Configuration and Firewalls 25x fail 2x notchecked
iptables and ip6tables 1x fail 2x notchecked
Inspect and Activate Default Rules 1x fail 1x notchecked
Verify iptables Enabledmedium
fail
Set Default ip6tables Policy for Incoming Packetsmedium
notchecked
Strengthen the Default Ruleset 1x notchecked
Set Default iptables Policy for Incoming Packetsmedium
notchecked
Install iptables Packagemedium
pass
IPv6 7x fail
Configure IPv6 Settings if Necessary 7x fail
Configure Accepting Router Advertisements on All IPv6 Interfacesmedium
fail
Disable Accepting ICMP Redirects for All IPv6 Interfacesmedium
fail
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfacesmedium
fail
Disable Kernel Parameter for IPv6 Forwardingmedium
fail
Disable Accepting Router Advertisements on all IPv6 Interfaces by Defaultmedium
fail
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfacesmedium
fail
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Defaultmedium
fail
Kernel Parameters Which Affect Networking 16x fail
Network Related Kernel Runtime Parameters for Hosts and Routers 13x fail
Disable Accepting ICMP Redirects for All IPv4 Interfacesmedium
fail
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfacesmedium
fail
Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfacesunknown
fail
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfacesmedium
fail
Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfacesmedium
fail
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfacesmedium
fail
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Defaultmedium
fail
Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Defaultunknown
fail
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Defaultmedium
fail
Configure Kernel Parameter for Accepting Secure Redirects By Defaultmedium
fail
Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfacesmedium
fail
Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfacesunknown
fail
Enable Kernel Parameter to Use TCP Syncookies on Network Interfacesmedium
fail
Network Parameters for Hosts Only 3x fail
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfacesmedium
fail
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Defaultmedium
fail
Disable Kernel Parameter for IP Forwarding on IPv4 Interfacesmedium
fail
nftables 1x fail
Install nftables Packagemedium
fail
Uninstall nftables packagemedium
pass
Verify nftables service disabledmedium
pass
Wireless Networking
Disable Wireless Through Software Configuration
Deactivate Wireless Network Interfacesmedium
pass
File Permissions and Masks 11x fail
Verify Permissions on Important Files and Directories
Verify Group Who Owns Backup group Filemedium
pass
Verify Group Who Owns Backup gshadow Filemedium
pass
Verify Group Who Owns Backup passwd Filemedium
pass
Verify User Who Owns Backup shadow Filemedium
pass
Verify Group Who Owns group Filemedium
pass
Verify Group Who Owns gshadow Filemedium
pass
Verify Group Who Owns passwd Filemedium
pass
Verify Group Who Owns shadow Filemedium
pass
Verify User Who Owns Backup group Filemedium
pass
Verify User Who Owns Backup gshadow Filemedium
pass
Verify User Who Owns Backup passwd Filemedium
pass
Verify Group Who Owns Backup shadow Filemedium
pass
Verify User Who Owns group Filemedium
pass
Verify User Who Owns gshadow Filemedium
pass
Verify User Who Owns passwd Filemedium
pass
Verify User Who Owns shadow Filemedium
pass
Verify Permissions on Backup group Filemedium
pass
Verify Permissions on Backup gshadow Filemedium
pass
Verify Permissions on Backup passwd Filemedium
pass
Verify Permissions on Backup shadow Filemedium
pass
Verify Permissions on group Filemedium
pass
Verify Permissions on gshadow Filemedium
pass
Verify Permissions on passwd Filemedium
pass
Verify Permissions on shadow Filemedium
pass
Verify that All World-Writable Directories Have Sticky Bits Setmedium
pass
Ensure No World-Writable Files Existmedium
pass
Ensure All Files Are Owned by a Usermedium
pass
Restrict Dynamic Mounting and Unmounting of Filesystems 7x fail
Disable the Automountermedium
pass
Disable Mounting of cramfslow
fail
Disable Mounting of freevxfslow
fail
Disable Mounting of hfslow
fail
Disable Mounting of hfspluslow
fail
Disable Mounting of jffs2low
fail
Disable Mounting of udflow
fail
Disable Modprobe Loading of USB Storage Drivermedium
fail
Restrict Partition Mount Options 1x fail
Add nodev Option to /dev/shmmedium
pass
Add noexec Option to /dev/shmmedium
fail
Add nosuid Option to /dev/shmmedium
pass
Restrict Programs from Dangerous Execution Patterns 3x fail
Disable Core Dumps 2x fail
Disable Core Dumps for All Usersmedium
fail
Disable Core Dumps for SUID programsmedium
fail
Enable ExecShield 1x fail
Enable Randomized Layout of Virtual Address Spacemedium
fail
Services 25x fail
Avahi Server
Disable Avahi Server if Possible
Disable Avahi Server Softwaremedium
pass
Cron and At Daemons 6x fail
Restrict at and cron to Authorized Users if Necessary
Verify Group Who Owns /etc/at.allow filemedium
pass
Verify Group Who Owns /etc/cron.allow filemedium
pass
Verify User Who Owns /etc/at.allow filemedium
pass
Verify User Who Owns /etc/cron.allow filemedium
pass
Verify Permissions on /etc/at.allow filemedium
pass
Verify Permissions on /etc/cron.allow filemedium
pass
Enable cron Servicemedium
pass
Verify Group Who Owns cron.dmedium
pass
Verify Group Who Owns cron.dailymedium
pass
Verify Group Who Owns cron.hourlymedium
pass
Verify Group Who Owns cron.monthlymedium
pass
Verify Group Who Owns cron.weeklymedium
pass
Verify Group Who Owns Crontabmedium
pass
Verify Owner on cron.dmedium
pass
Verify Owner on cron.dailymedium
pass
Verify Owner on cron.hourlymedium
pass
Verify Owner on cron.monthlymedium
pass
Verify Owner on cron.weeklymedium
pass
Verify Owner on crontabmedium
pass
Verify Permissions on cron.dmedium
fail
Verify Permissions on cron.dailymedium
fail
Verify Permissions on cron.hourlymedium
fail
Verify Permissions on cron.monthlymedium
fail
Verify Permissions on cron.weeklymedium
fail
Verify Permissions on crontabmedium
fail
Deprecated services
Uninstall the nis packagelow
pass
DHCP
Disable DHCP Server
Uninstall DHCP Server Packagemedium
pass
DNS Server
Disable DNS Server
Uninstall bind Packagelow
pass
FTP Server
Disable vsftpd if Possible
Uninstall vsftpd Packagehigh
pass
Web Server
Disable Apache if Possible
Uninstall httpd Packageunknown
pass
IMAP and POP3 Server
Disable Dovecot
Uninstall dovecot Packageunknown
pass
LDAP
Configure OpenLDAP Clients
Ensure LDAP client is not installedlow
pass
Configure OpenLDAP Server
Uninstall openldap-servers Packagelow
pass
NFS and RPC
Disable All NFS Services if Possible
Disable Services Used Only by NFS
Uninstall rpcbind Packagelow
pass
Network Time Protocol 4x fail
The Chrony package is installedmedium
fail
Install the ntp servicehigh
fail
Enable the NTP Daemonmedium
fail
Enable the NTP Daemonhigh
fail
Ensure that chronyd is running under chrony user accountmedium
notapplicable
A remote time server for Chrony is configuredmedium
notapplicable
Obsolete Services 2x fail
Xinetd
Uninstall xinetd Packagelow
pass
Rlogin, Rsh, and Rexec
Uninstall rsh Packageunknown
pass
Remove Rsh Trust Fileshigh
pass
Chat/Messaging Services
Uninstall talk Packagemedium
pass
Telnet 1x fail
Remove telnet Clientslow
fail
Uninstall rsync Packagemedium
fail
Print Support
Uninstall CUPS Packageunknown
pass
Disable the CUPS Serviceunknown
pass
Proxy Server
Disable Squid if Possible
Uninstall squid Packageunknown
pass
Samba(SMB) Microsoft Windows File Sharing Server
Disable Samba if Possible
Uninstall Samba Packageunknown
pass
SNMP Server
Disable SNMP Server if Possible
Uninstall net-snmp Packageunknown
pass
SSH Server 13x fail
Configure OpenSSH Server if Necessary 12x fail
Set SSH Client Alive Count Maxmedium
fail
Set SSH Client Alive Intervalmedium
fail
Disable Host-Based Authenticationmedium
fail
Disable SSH Access via Empty Passwordshigh
fail
Disable SSH Support for .rhosts Filesmedium
fail
Disable SSH Root Loginmedium
fail
Do Not Allow SSH Environment Optionsmedium
fail
Set LogLevel to INFOlow
fail
Set SSH authentication attempt limitmedium
fail
Set SSH MaxSessions limitmedium
fail
Use Only FIPS 140-2 Validated Ciphersmedium
fail
Use Only FIPS 140-2 Validated MACsmedium
fail
Verify Group Who Owns SSH Server config filemedium
pass
Verify Owner on SSH Server config filemedium
pass
Verify Permissions on SSH Server config filemedium
fail
Verify Permissions on SSH Server Private *_key Key Filesmedium
pass
Verify Permissions on SSH Server Public *.pub Key Filesmedium
pass
X Window System
Disable X Windows
Remove the X Windows Package Groupmedium
pass

Result Details

Install AIDExccdf_org.ssgproject.content_rule_package_aide_installed medium

Install AIDE

Rule IDxccdf_org.ssgproject.content_rule_package_aide_installed
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-002696, CCI-002699, CCI-001744, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, 1034, 1288, 1341, 1417, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, SRG-OS-000445-GPOS-00199, UBTU-20-010450, 1.4.1

Description

The aide package can be installed with the following command:

$ apt-get install aide

Rationale

The AIDE package must be installed if it is to be available for integrity checking.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}
Remediation script:   (show)


[[packages]]
name = "aide"
version = "*"
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure aide is installed
  package:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_aide_installed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "aide"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Build and Test AIDE Databasexccdf_org.ssgproject.content_rule_aide_build_database medium

Build and Test AIDE Database

Rule IDxccdf_org.ssgproject.content_rule_aide_build_database
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, SRG-OS-000445-GPOS-00199, 1.4.1

Description

Run the following command to generate a new database:

$ sudo aideinit
By default, the database will be written to the file /var/lib/aide/aide.db.new. Storing the database, the configuration file /etc/aide.conf, and the binary /usr/bin/aide.wrapper (or hashes of these files), in a secure location (such as on read-only media) provides additional assurance about their integrity. The newly-generated database can be installed as follows:
$ sudo cp /var/lib/aide/aide.db.new /var/lib/aide/aide.db
To initiate a manual check, run the following command:
$ sudo /usr/bin/aide.wrapper --check
If this check produces any unexpected output, investigate.

Rationale

For AIDE to be effective, an initial database of "known-good" information about files must be captured and it should be able to be verified against the installed files.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database
  command: /usr/sbin/aide --init
  changed_when: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check whether the stock AIDE Database exists
  stat:
    path: /var/lib/aide/aide.db.new.gz
  register: aide_database_stat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Stage AIDE Database
  copy:
    src: /var/lib/aide/aide.db.new
    dest: /var/lib/aide/aide.db
    backup: true
    remote_src: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (aide_database_stat.stat.exists is defined and aide_database_stat.stat.exists)
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "aide"

AIDE_CONFIG=/etc/aide/aide.conf
DEFAULT_DB_PATH=/var/lib/aide/aide.db

# Fix db path in the config file, if necessary
if ! grep -q '^database=file:' ${AIDE_CONFIG}; then
    # replace_or_append gets confused by 'database=file' as a key, so should not be used.
    #replace_or_append "${AIDE_CONFIG}" '^database=file' "${DEFAULT_DB_PATH}" '@CCENUM@' '%s:%s'
    echo "database=file:${DEFAULT_DB_PATH}" >> ${AIDE_CONFIG}
fi

# Fix db out path in the config file, if necessary
if ! grep -q '^database_out=file:' ${AIDE_CONFIG}; then
    echo "database_out=file:${DEFAULT_DB_PATH}.new" >> ${AIDE_CONFIG}
fi

/usr/sbin/aideinit -y -f

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Configure Periodic Execution of AIDExccdf_org.ssgproject.content_rule_aide_periodic_cron_checking medium

Configure Periodic Execution of AIDE

Rule IDxccdf_org.ssgproject.content_rule_aide_periodic_cron_checking
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-001744, CCI-002699, CCI-002702, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, SI-7, SI-7(1), CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, SRG-OS-000363-GPOS-00150, SRG-OS-000446-GPOS-00200, SRG-OS-000447-GPOS-00201, UBTU-20-010074, 1.4.2

Description

At a minimum, AIDE should be configured to run a weekly scan. To implement a daily execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:

05 4 * * * root /usr/bin/aide.wrapper --config /etc/aide/aide.conf --check
To implement a weekly execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:
05 4 * * 0 root /usr/bin/aide.wrapper --config /etc/aide/aide.conf --check
AIDE can be executed periodically through other means; this is merely one example. The usage of cron's special time codes, such as @daily and @weekly is acceptable.

Rationale

By default, AIDE does not install itself for periodic execution. Periodically running AIDE is necessary to reveal unexpected changes in installed files.

Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the operating system. Changes to operating system configurations can have unintended side effects, some of which may be relevant to security.

Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the operating system. The operating system's Information Management Officer (IMO)/Information System Security Officer (ISSO) and System Administrators (SAs) must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - RedHat
  set_fact:
    cron_pkg_name: cronie
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "RedHat" or ansible_os_family == "Suse"
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - Debian
  set_fact:
    cron_pkg_name: cron
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "Debian"
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Install cron
  package:
    name: '{{ cron_pkg_name }}'
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure Periodic Execution of AIDE
  cron:
    name: run AIDE check
    minute: 5
    hour: 4
    weekday: 0
    user: root
    job: /usr/bin/aide.wrapper --check
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "aide"

# AiDE usually adds its own cron jobs to /etc/cron.daily. If script is there, this rule is
# compliant. Otherwise, we copy the script to the /etc/cron.weekly
if ! egrep -q '^(\/usr\/bin\/)?aide(\.wrapper)?\s+' /etc/cron.*/*; then
    cp -f /usr/share/aide/config/cron.daily/aide /etc/cron.weekly/
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure /tmp Located On Separate Partitionxccdf_org.ssgproject.content_rule_partition_for_tmp low

Ensure /tmp Located On Separate Partition

Rule IDxccdf_org.ssgproject.content_rule_partition_for_tmp
Result
fail
Time2023-03-25T10:35:07
Severitylow
Identifiers and References

References:  BP28(R12), 12, 15, 8, APO13.01, DSS05.02, CCI-000366, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, CM-6(a), SC-5(2), PR.PT-4, SRG-OS-000480-GPOS-00227, 1.1.2

Description

The /tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.

Rationale

The /tmp partition is used as temporary storage by many programs. Placing /tmp in its own partition enables the setting of more restrictive mount options, which can help protect programs which use it.

Remove the GDM Package Groupxccdf_org.ssgproject.content_rule_package_gdm_removed medium

Remove the GDM Package Group

Rule IDxccdf_org.ssgproject.content_rule_package_gdm_removed
Result
notapplicable
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CM-7(a), CM-7(b), CM-6(a), SRG-OS-000480-GPOS-00227, 1.10

Description

By removing the gdm3 package, the system no longer has GNOME installed installed. If X Windows is not installed then the system cannot boot into graphical user mode. This prevents the system from being accidentally or maliciously booted into a graphical.target mode. To do so, run the following command:

$ sudo apt remove gdm3

Rationale

Unnecessary service packages must not be installed to decrease the attack surface of the system. A graphical environment is unnecessary for certain types of systems including a virtualization hypervisor.

Install sudo Packagexccdf_org.ssgproject.content_rule_package_sudo_installed medium

Install sudo Package

Rule IDxccdf_org.ssgproject.content_rule_package_sudo_installed
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R19), 1382, 1384, 1386, CM-6(a), FMT_MOF_EXT.1, Req-10.2.1.5, SRG-OS-000324-GPOS-00125, 1.3.1

Description

The sudo package can be installed with the following command:

$ apt-get install sudo

Rationale

sudo is a program designed to allow a system administrator to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow system users to get their work done.

Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo use_ptyxccdf_org.ssgproject.content_rule_sudo_add_use_pty medium

Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo use_pty

Rule IDxccdf_org.ssgproject.content_rule_sudo_add_use_pty
Result
error
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R58), Req-10.2.1.5, 1.3.2

Description

The sudo use_pty tag, when specified, will only execute sudo commands from users logged in to a real tty. This should be enabled by making sure that the use_pty tag exists in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.

Rationale

Requiring that sudo commands be run in a pseudo-terminal can prevent an attacker from retaining access to the user's terminal after the main program has finished executing.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure use_pty is enabled in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults.*\buse_pty\b.*$
    line: Defaults use_pty
    validate: /usr/sbin/visudo -cf %s
  tags:
  - PCI-DSS-Req-10.2.1.5
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_add_use_pty
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults[\s]*\buse_pty\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option use_pty
        echo "Defaults use_pty" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi
Ensure Sudo Logfile Exists - sudo logfilexccdf_org.ssgproject.content_rule_sudo_custom_logfile low

Ensure Sudo Logfile Exists - sudo logfile

Rule IDxccdf_org.ssgproject.content_rule_sudo_custom_logfile
Result
error
Time2023-03-25T10:35:07
Severitylow
Identifiers and References

References:  Req-10.2.1.5, 1.3.3

Description

A custom log sudo file can be configured with the 'logfile' tag. This rule configures a sudo custom logfile at the default location suggested by CIS, which uses /var/log/sudo.log.

Rationale

A sudo log file simplifies auditing of sudo commands.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_sudo_logfile # promote to variable
  set_fact:
    var_sudo_logfile: !!str /var/log/sudo.log
  tags:
    - always

- name: Ensure logfile is enabled with the appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults\s(.*)\blogfile=[-]?.+\b(.*)$
    line: Defaults \1logfile={{ var_sudo_logfile }}\2
    validate: /usr/sbin/visudo -cf %s
    backrefs: true
  register: edit_sudoers_logfile_option
  tags:
  - PCI-DSS-Req-10.2.1.5
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile

- name: Enable logfile option with appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    line: Defaults logfile={{ var_sudo_logfile }}
    validate: /usr/sbin/visudo -cf %s
  when: edit_sudoers_logfile_option is defined and not edit_sudoers_logfile_option.changed
  tags:
  - PCI-DSS-Req-10.2.1.5
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict


var_sudo_logfile='/var/log/sudo.log'


if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults[\s]*\blogfile=("(?:\\"|\\\\|[^"\\\n])*"\B|[^"](?:(?:\\,|\\"|\\ |\\\\|[^", \\\n])*)\b)\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option logfile
        echo "Defaults logfile=${var_sudo_logfile}" >> /etc/sudoers
    else
        # sudoers file defines Option logfile, remediate if appropriate value is not set
        if ! grep -P "^[\s]*Defaults.*\blogfile=${var_sudo_logfile}\b.*$" /etc/sudoers; then
            
            escaped_variable=${var_sudo_logfile//$'/'/$'\/'}
            sed -Ei "s/(^[\s]*Defaults.*\blogfile=)[-]?.+(\b.*$)/\1$escaped_variable\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi
Verify Group Ownership of System Login Bannerxccdf_org.ssgproject.content_rule_file_groupowner_etc_issue medium

Verify Group Ownership of System Login Banner

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_issue
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1.8.1.5

Description

To properly set the group owner of /etc/issue, run the command:

$ sudo chgrp root /etc/issue

Rationale

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.

Verify Group Ownership of Message of the Day Bannerxccdf_org.ssgproject.content_rule_file_groupowner_etc_motd medium

Verify Group Ownership of Message of the Day Banner

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_motd
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1.8.1.4

Description

To properly set the group owner of /etc/motd, run the command:

$ sudo chgrp root /etc/motd

Rationale

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.

Verify ownership of System Login Bannerxccdf_org.ssgproject.content_rule_file_owner_etc_issue medium

Verify ownership of System Login Banner

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_issue
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1.8.1.5

Description

To properly set the owner of /etc/issue, run the command:

$ sudo chown root /etc/issue 

Rationale

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.

Verify ownership of Message of the Day Bannerxccdf_org.ssgproject.content_rule_file_owner_etc_motd medium

Verify ownership of Message of the Day Banner

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_motd
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1.8.1.4

Description

To properly set the owner of /etc/motd, run the command:

$ sudo chown root /etc/motd 

Rationale

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.

Verify permissions on System Login Bannerxccdf_org.ssgproject.content_rule_file_permissions_etc_issue medium

Verify permissions on System Login Banner

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_issue
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1.8.1.5

Description

To properly set the permissions of /etc/issue, run the command:

$ sudo chmod 0644 /etc/issue

Rationale

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.

Verify permissions on Message of the Day Bannerxccdf_org.ssgproject.content_rule_file_permissions_etc_motd medium

Verify permissions on Message of the Day Banner

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_motd
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1.8.1.4

Description

To properly set the permissions of /etc/motd, run the command:

$ sudo chmod 0644 /etc/motd

Rationale

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.

Limit Password Reusexccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember medium

Limit Password Reuse

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000200, SRG-OS-000077-GPOS-00045, 5.3.3

Description

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_pwhistory PAM modules.

In the file /etc/pam.d/common-password, make sure the parameters remember and use_authtok are present, and that the value for the remember parameter is 5 or greater. For example:

password requisite pam_pwhistory.so ...existing_options... remember=5 use_authtok
The DoD STIG requirement is 5 passwords.

Rationale

Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_remember='5'

VALUES+=("$var_password_pam_remember")
VALUE_NAMES+=("remember")
ARGS+=("")
NEW_ARGS+=("")
VALUES+=("")
VALUE_NAMES+=("")
ARGS+=("use_authtok")
NEW_ARGS+=("use_authtok")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_pwhistory.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_pwhistory.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwhistory.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_pwhistory.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_pwhistory.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_pwhistory.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Set Deny For Failed Password Attemptsxccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2 medium

Set Deny For Failed Password Attempts

Rule IDxccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000044, Req-8.1.6, SRG-OS-000021-GPOS-00005, UBTU-20-010072, 5.3.2

Description

The Ubuntu 20.04 operating system must lock an account after - at most - 3 consecutive invalid access attempts.

Rationale

By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account. To configure the operating system to lock an account after three unsuccessful consecutive access attempts using pam_tally2.so, modify the content of both /etc/pam.d/common-auth and /etc/pam.d/common-account as follows:

  • add or modify the pam_tally2.so module line in /etc/pam.d/common-auth to ensure both onerr=fail and deny=3 are present. For example:
    auth required pam_tally2.so onerr=fail silent audit deny=3
  • add or modify the following line in /etc/pam.d/common-account:
    account required pam_tally2.so

Remediation Shell script:   (show)


var_password_pam_tally2='3'

# Use a non-number regexp to force update of the value of the deny option
if [ -e "/etc/pam.d/common-auth" ] ; then
    valueRegex="°" defaultValue="${var_password_pam_tally2}"
    # non-empty values need to be preceded by an equals sign
    [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
    # add an equals sign to non-empty values
    [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

    # fix 'type' if it's wrong
    if grep -q -P "^\\s*(?"'!'"auth\\s)[[:alnum:]]+\\s+[[:alnum:]]+\\s+pam_tally2.so" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*)[[:alnum:]]+(\\s+[[:alnum:]]+\\s+pam_tally2.so)/\\1auth\\2/" "/etc/pam.d/common-auth"
    fi

    # fix 'control' if it's wrong
    if grep -q -P "^\\s*auth\\s+(?"'!'"required)[[:alnum:]]+\\s+pam_tally2.so" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+)[[:alnum:]]+(\\s+pam_tally2.so)/\\1required\\2/" "/etc/pam.d/common-auth"
    fi

    # fix the value for 'option' if one exists but does not match 'valueRegex'
    if grep -q -P "^\\s*auth\\s+required\\s+pam_tally2.so(\\s.+)?\\s+deny(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+required\\s+pam_tally2.so(\\s.+)?\\s)deny=[^[:space:]]*/\\1deny${defaultValue}/" "/etc/pam.d/common-auth"

    # add 'option=default' if option is not set
    elif grep -q -E "^\\s*auth\\s+required\\s+pam_tally2.so" < "/etc/pam.d/common-auth" &&
            grep    -E "^\\s*auth\\s+required\\s+pam_tally2.so" < "/etc/pam.d/common-auth" | grep -q -E -v "\\sdeny(=|\\s|\$)" ; then

        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+required\\s+pam_tally2.so[^\\n]*)/\\1 deny${defaultValue}/" "/etc/pam.d/common-auth"
    # add a new entry if none exists
    elif ! grep -q -P "^\\s*auth\\s+required\\s+pam_tally2.so(\\s.+)?\\s+deny${valueRegex}(\\s|\$)" < "/etc/pam.d/common-auth" ; then
        echo "auth required pam_tally2.so deny${defaultValue}" >> "/etc/pam.d/common-auth"
    fi
else
    echo "/etc/pam.d/common-auth doesn't exist" >&2
fi
if [ -e "/etc/pam.d/common-auth" ] ; then
    valueRegex="(fail)" defaultValue="fail"
    # non-empty values need to be preceded by an equals sign
    [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
    # add an equals sign to non-empty values
    [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

    # fix 'type' if it's wrong
    if grep -q -P "^\\s*(?"'!'"auth\\s)[[:alnum:]]+\\s+[[:alnum:]]+\\s+pam_tally2.so" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*)[[:alnum:]]+(\\s+[[:alnum:]]+\\s+pam_tally2.so)/\\1auth\\2/" "/etc/pam.d/common-auth"
    fi

    # fix 'control' if it's wrong
    if grep -q -P "^\\s*auth\\s+(?"'!'"required)[[:alnum:]]+\\s+pam_tally2.so" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+)[[:alnum:]]+(\\s+pam_tally2.so)/\\1required\\2/" "/etc/pam.d/common-auth"
    fi

    # fix the value for 'option' if one exists but does not match 'valueRegex'
    if grep -q -P "^\\s*auth\\s+required\\s+pam_tally2.so(\\s.+)?\\s+onerr(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-auth" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+required\\s+pam_tally2.so(\\s.+)?\\s)onerr=[^[:space:]]*/\\1onerr${defaultValue}/" "/etc/pam.d/common-auth"

    # add 'option=default' if option is not set
    elif grep -q -E "^\\s*auth\\s+required\\s+pam_tally2.so" < "/etc/pam.d/common-auth" &&
            grep    -E "^\\s*auth\\s+required\\s+pam_tally2.so" < "/etc/pam.d/common-auth" | grep -q -E -v "\\sonerr(=|\\s|\$)" ; then

        sed --follow-symlinks -i -E -e "s/^(\\s*auth\\s+required\\s+pam_tally2.so[^\\n]*)/\\1 onerr${defaultValue}/" "/etc/pam.d/common-auth"
    # add a new entry if none exists
    elif ! grep -q -P "^\\s*auth\\s+required\\s+pam_tally2.so(\\s.+)?\\s+onerr${valueRegex}(\\s|\$)" < "/etc/pam.d/common-auth" ; then
        echo "auth required pam_tally2.so onerr${defaultValue}" >> "/etc/pam.d/common-auth"
    fi
else
    echo "/etc/pam.d/common-auth doesn't exist" >&2
fi
if [ -e "/etc/pam.d/common-account" ] ; then
    valueRegex="" defaultValue=""
    # non-empty values need to be preceded by an equals sign
    [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
    # add an equals sign to non-empty values
    [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

    # fix 'type' if it's wrong
    if grep -q -P "^\\s*(?"'!'"account\\s)[[:alnum:]]+\\s+[[:alnum:]]+\\s+pam_tally2.so" < "/etc/pam.d/common-account" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*)[[:alnum:]]+(\\s+[[:alnum:]]+\\s+pam_tally2.so)/\\1account\\2/" "/etc/pam.d/common-account"
    fi

    # fix 'control' if it's wrong
    if grep -q -P "^\\s*account\\s+(?"'!'"required)[[:alnum:]]+\\s+pam_tally2.so" < "/etc/pam.d/common-account" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*account\\s+)[[:alnum:]]+(\\s+pam_tally2.so)/\\1required\\2/" "/etc/pam.d/common-account"
    fi

    # fix the value for 'option' if one exists but does not match 'valueRegex'
    if grep -q -P "^\\s*account\\s+required\\s+pam_tally2.so(\\s.+)?\\s+(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-account" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*account\\s+required\\s+pam_tally2.so(\\s.+)?\\s)=[^[:space:]]*/\\1${defaultValue}/" "/etc/pam.d/common-account"

    # add 'option=default' if option is not set
    elif grep -q -E "^\\s*account\\s+required\\s+pam_tally2.so" < "/etc/pam.d/common-account" &&
            grep    -E "^\\s*account\\s+required\\s+pam_tally2.so" < "/etc/pam.d/common-account" | grep -q -E -v "\\s(=|\\s|\$)" ; then

        sed --follow-symlinks -i -E -e "s/^(\\s*account\\s+required\\s+pam_tally2.so[^\\n]*)/\\1 ${defaultValue}/" "/etc/pam.d/common-account"
    # add a new entry if none exists
    elif ! grep -q -P "^\\s*account\\s+required\\s+pam_tally2.so(\\s.+)?\\s+${valueRegex}(\\s|\$)" < "/etc/pam.d/common-account" ; then
        echo "account required pam_tally2.so ${defaultValue}" >> "/etc/pam.d/common-account"
    fi
else
    echo "/etc/pam.d/common-account doesn't exist" >&2
fi
Ensure PAM Enforces Password Requirements - Minimum Digit Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit medium

Ensure PAM Enforces Password Requirements - Minimum Digit Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000194, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, SRG-OS-000071-GPOS-00039, SRG-OS-000071-VMM-000380, UBTU-20-010052, 5.3.1

Description

The pam_pwquality module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_pwquality will grant +1 additional length credit for each digit. Modify the dcredit setting in /etc/security/pwquality.conf to require the use of a digit in passwords.

Rationale

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010052
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_dcredit # promote to variable
  set_fact:
    var_password_pam_dcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Ensure
    PAM variable dcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*dcredit
    line: dcredit = {{ var_password_pam_dcredit }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010052
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_dcredit='-1'






# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^dcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure PAM Enforces Password Requirements - Minimum Lowercase Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit medium

Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000193, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, SRG-OS-000070-GPOS-00038, SRG-OS-000070-VMM-000370, UBTU-20-010051, 5.3.1

Description

The pam_pwquality module's lcredit parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each lowercase character. Modify the lcredit setting in /etc/security/pwquality.conf to require the use of a lowercase character in passwords.

Rationale

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possble combinations that need to be tested before the password is compromised. Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010051
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_lcredit # promote to variable
  set_fact:
    var_password_pam_lcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters -
    Ensure PAM variable lcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*lcredit
    line: lcredit = {{ var_password_pam_lcredit }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010051
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_lcredit='-1'






# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^lcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure PAM Enforces Password Requirements - Minimum Different Categoriesxccdf_org.ssgproject.content_rule_accounts_password_pam_minclass medium

Ensure PAM Enforces Password Requirements - Minimum Different Categories

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_minclass
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000195, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, SRG-OS-000072-GPOS-00040, 5.3.1

Description

The pam_pwquality module's minclass parameter controls requirements for usage of different character classes, or types, of character that must exist in a password before it is considered valid. For example, setting this value to three (3) requires that any password must have characters from at least three different categories in order to be approved. The default value is zero (0), meaning there are no required classes. There are four categories available:

* Upper-case characters
* Lower-case characters
* Digits
* Special characters (for example, punctuation)
Modify the minclass setting in /etc/security/pwquality.conf entry to require 4 differing categories of characters when changing passwords.

Rationale

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Requiring a minimum number of character categories makes password guessing attacks more difficult by ensuring a larger search space.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minclass # promote to variable
  set_fact:
    var_password_pam_minclass: !!str 4
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Different Categories -
    Ensure PAM variable minclass is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minclass
    line: minclass = {{ var_password_pam_minclass }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_minclass='4'






# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minclass")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minclass"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minclass\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^minclass\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure PAM Enforces Password Requirements - Minimum Lengthxccdf_org.ssgproject.content_rule_accounts_password_pam_minlen medium

Ensure PAM Enforces Password Requirements - Minimum Length

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_minlen
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000205, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, SRG-OS-000078-GPOS-00046, SRG-OS-000072-VMM-000390, SRG-OS-000078-VMM-000450, UBTU-20-010054, 5.3.1

Description

The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=14 after pam_pwquality to set minimum password length requirements.

Rationale

The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-UBTU-20-010054
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 14
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure PAM variable
    minlen is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-UBTU-20-010054
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_minlen='14'






# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure PAM Enforces Password Requirements - Minimum Special Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit medium

Ensure PAM Enforces Password Requirements - Minimum Special Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-001619, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, SRG-OS-000266-GPOS-00101, SRG-OS-000266-VMM-000940, UBTU-20-010055, 5.3.1

Description

The pam_pwquality module's ocredit= parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each special character. Modify the ocredit setting in /etc/security/pwquality.conf to equal -1 to require use of a special character in passwords.

Rationale

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010055
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ocredit # promote to variable
  set_fact:
    var_password_pam_ocredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Special Characters - Ensure
    PAM variable ocredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ocredit
    line: ocredit = {{ var_password_pam_ocredit }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010055
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_ocredit='-1'






# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ocredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ocredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ocredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^ocredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Sessionxccdf_org.ssgproject.content_rule_accounts_password_pam_retry medium

Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Session

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_retry
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1, 11, 12, 15, 16, 3, 5, 9, 5.5.3, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000192, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, PR.IP-1, FMT_MOF_EXT.1, SRG-OS-000069-GPOS-00037, SRG-OS-000480-GPOS-00227, UBTU-20-010057, 5.3.1

Description

To configure the number of retry prompts that are permitted per-session: Edit the pam_pwquality.so statement in /etc/pam.d/common-password to show retry=3, or a lower value if site policy is more restrictive. The DoD requirement is a maximum of 3 prompts per session.

Rationale

Setting the password retry prompts that are permitted on a per-session basis to a low value requires some software, such as SSH, to re-connect. This can slow down and draw additional attention to some types of password-guessing attacks. Note that this is different from account lockout, which is provided by the pam_faillock module.

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_retry='3'


if [ -e "/etc/pam.d/common-password" ] ; then
    valueRegex="$var_password_pam_retry" defaultValue="$var_password_pam_retry"
    # non-empty values need to be preceded by an equals sign
    [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
    # add an equals sign to non-empty values
    [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

    # fix 'type' if it's wrong
    if grep -q -P "^\\s*(?"'!'"password\\s)[[:alnum:]]+\\s+[[:alnum:]]+\\s+pam_pwquality.so" < "/etc/pam.d/common-password" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*)[[:alnum:]]+(\\s+[[:alnum:]]+\\s+pam_pwquality.so)/\\1password\\2/" "/etc/pam.d/common-password"
    fi

    # fix 'control' if it's wrong
    if grep -q -P "^\\s*password\\s+(?"'!'"requisite)[[:alnum:]]+\\s+pam_pwquality.so" < "/etc/pam.d/common-password" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+)[[:alnum:]]+(\\s+pam_pwquality.so)/\\1requisite\\2/" "/etc/pam.d/common-password"
    fi

    # fix the value for 'option' if one exists but does not match 'valueRegex'
    if grep -q -P "^\\s*password\\s+requisite\\s+pam_pwquality.so(\\s.+)?\\s+retry(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwquality.so(\\s.+)?\\s)retry=[^[:space:]]*/\\1retry${defaultValue}/" "/etc/pam.d/common-password"

    # add 'option=default' if option is not set
    elif grep -q -E "^\\s*password\\s+requisite\\s+pam_pwquality.so" < "/etc/pam.d/common-password" &&
            grep    -E "^\\s*password\\s+requisite\\s+pam_pwquality.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\sretry(=|\\s|\$)" ; then

        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwquality.so[^\\n]*)/\\1 retry${defaultValue}/" "/etc/pam.d/common-password"
    # add a new entry if none exists
    elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_pwquality.so(\\s.+)?\\s+retry${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
        echo "password requisite pam_pwquality.so retry${defaultValue}" >> "/etc/pam.d/common-password"
    fi
else
    echo "/etc/pam.d/common-password doesn't exist" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure PAM Enforces Password Requirements - Minimum Uppercase Charactersxccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit medium

Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000192, CCI-000193, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, SRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038, SRG-OS-000069-VMM-000360, UBTU-20-010050, 5.3.1

Description

The pam_pwquality module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each uppercase character. Modify the ucredit setting in /etc/security/pwquality.conf to require the use of an uppercase character in passwords.

Rationale

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010050
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ucredit # promote to variable
  set_fact:
    var_password_pam_ucredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters -
    Ensure PAM variable ucredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ucredit
    line: ucredit = {{ var_password_pam_ucredit }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010050
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_ucredit='-1'






# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ucredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ucredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ucredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^ucredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Install pam_pwquality Packagexccdf_org.ssgproject.content_rule_package_pam_pwquality_installed medium

Install pam_pwquality Package

Rule IDxccdf_org.ssgproject.content_rule_package_pam_pwquality_installed
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00225, UBTU-20-010057

Description

The libpam-pwquality package can be installed with the following command:

$ apt-get install libpam-pwquality

Rationale

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. "pwquality" enforces complex password construction configuration and has the ability to limit brute-force attacks on the system.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_libpam-pwquality

class install_libpam-pwquality {
  package { 'libpam-pwquality':
    ensure => 'installed',
  }
}
Remediation script:   (show)


[[packages]]
name = "libpam-pwquality"
version = "*"
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure libpam-pwquality is installed
  package:
    name: libpam-pwquality
    state: present
  tags:
  - DISA-STIG-UBTU-20-010057
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_pam_pwquality_installed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

DEBIAN_FRONTEND=noninteractive apt-get install -y "libpam-pwquality"
Set Existing Passwords Maximum Agexccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing medium

Set Existing Passwords Maximum Age

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000199, IA-5(f), IA-5(1)(d), CM-6(a), SRG-OS-000076-GPOS-00044, SRG-OS-000076-VMM-000430, 5.4.1.1

Description

Configure non-compliant accounts to enforce a 365-day maximum password lifetime restriction by running the following command:

$ sudo chage -M 365 USER

Rationale

Any password, no matter how complex, can eventually be cracked. Therefore, passwords need to be changed periodically. If the operating system does not limit the lifetime of passwords and force users to change their passwords, there is the risk that the operating system passwords could be compromised.

Set Existing Passwords Minimum Agexccdf_org.ssgproject.content_rule_accounts_password_set_min_life_existing medium

Set Existing Passwords Minimum Age

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_set_min_life_existing
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000198, IA-5(f), IA-5(1)(d), CM-6(a), SRG-OS-000075-GPOS-00043, SRG-OS-000075-VMM000420, 5.4.1.2

Description

Configure non-compliant accounts to enforce a 24 hours/1 day minimum password lifetime by running the following command:

$ sudo chage -m 1 USER

Rationale

Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.

Verify All Account Password Hashes are Shadowed with SHA512xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed_sha512 medium

Verify All Account Password Hashes are Shadowed with SHA512

Rule IDxccdf_org.ssgproject.content_rule_accounts_password_all_shadowed_sha512
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000196, CCI-000803, IA-5(1)(c), IA-5(1).1(v), IA-7, IA-7.1, SRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061, 5.3.4

Description

Verify the operating system requires the shadow password suite configuration be set to encrypt interactive user passwords using a strong cryptographic hash. Check that the interactive user account passwords are using a strong password hash with the following command:

$ sudo cut -d: -f2 /etc/shadow
$6$kcOnRq/5$NUEYPuyL.wghQwWssXRcLRFiiru7f5JPV6GaJhNC2aK5F3PZpE/BCCtwrxRc/AInKMNX3CdMw11m9STiql12f/
Password hashes ! or * indicate inactive accounts not available for logon and are not evaluated. If any interactive user password hash does not begin with $6, this is a finding.

Rationale

Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.

Prevent Login to Accounts With Empty Passwordxccdf_org.ssgproject.content_rule_no_empty_passwords high

Prevent Login to Accounts With Empty Password

Rule IDxccdf_org.ssgproject.content_rule_no_empty_passwords
Result
pass
Time2023-03-25T10:35:07
Severityhigh
Identifiers and References

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, IA-5(1)(a), IA-5(c), CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, FIA_UAU.1, Req-8.2.3, SRG-OS-000480-GPOS-00227, 6.2.1

Description

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in /etc/pam.d/system-auth and /etc/pam.d/password-auth to prevent logins with empty passwords.

Rationale

If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.

Warnings
warning  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
Verify No netrc Files Existxccdf_org.ssgproject.content_rule_no_netrc_files medium

Verify No netrc Files Exist

Rule IDxccdf_org.ssgproject.content_rule_no_netrc_files
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, CCI-000196, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R1.3, CIP-003-8 R3, CIP-003-8 R3.1, CIP-003-8 R3.2, CIP-003-8 R3.3, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-5(h), IA-5(1)(c), CM-6(a), IA-5(7), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, 6.2.9

Description

The .netrc files contain login information used to auto-login into FTP servers and reside in the user's home directory. These files may contain unencrypted passwords to remote FTP servers making them susceptible to access by unauthorized users and should not be used. Any .netrc files should be removed.

Rationale

Unencrypted passwords for remote FTP servers may be stored in .netrc files.

Verify Only Root Has UID 0xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero high

Verify Only Root Has UID 0

Rule IDxccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero
Result
pass
Time2023-03-25T10:35:07
Severityhigh
Identifiers and References

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, AC-6(5), IA-4(b), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, Req-8.2.1, SRG-OS-000480-GPOS-00227, 6.2.2

Description

If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.
If the account is associated with system commands or applications the UID should be changed to one greater than "0" but less than "1000." Otherwise assign a UID greater than "1000" that has not already been assigned.

Rationale

An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.

Ensure that System Accounts Do Not Run a Shell Upon Loginxccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts medium

Ensure that System Accounts Do Not Run a Shell Upon Login

Rule IDxccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS06.03, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, 1491, A.12.4.1, A.12.4.3, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-6, CM-6(a), CM-6(b), CM-6.1(iv), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, Req-8.6.1, SRG-OS-000480-GPOS-00227, 5.4.2

Description

Some accounts are not associated with a human user of the system, and exist to perform some administrative function. Should an attacker be able to log into these accounts, they should not be granted access to a shell.

The login shell for each local account is stored in the last field of each line in /etc/passwd. System accounts are those user accounts with a user ID less than UID_MIN, where value of UID_MIN directive is set in /etc/login.defs configuration file. In the default configuration UID_MIN is set to 1000, thus system accounts are those user accounts with a user ID less than 1000. The user ID is stored in the third field. If any system account SYSACCT (other than root) has a login shell, disable it with the command:

$ sudo usermod -s /sbin/nologin SYSACCT

Rationale

Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.

Warnings
warning  Do not perform the steps in this section on the root account. Doing so might cause the system to become inaccessible.
Enforce usage of pam_wheel for su authenticationxccdf_org.ssgproject.content_rule_use_pam_wheel_for_su medium

Enforce usage of pam_wheel for su authentication

Rule IDxccdf_org.ssgproject.content_rule_use_pam_wheel_for_su
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  FMT_SMF_EXT.1.1, Req-8.6.1, SRG-OS-000373-GPOS-00156, SRG-OS-000312-GPOS-00123, 5.6

Description

To ensure that only users who are members of the wheel group can run commands with altered privileges through the su command, make sure that the following line exists in the file /etc/pam.d/su:

auth required pam_wheel.so use_uid

Rationale

The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.

Warnings
warning  Members of "wheel" or GID 0 groups are checked by default if the group option is not set for pam_wheel.so module. Therefore, members of these groups should be manually checked or a different group should be informed according to the site policy.
Ensure that Root's Path Does Not Include World or Group-Writable Directoriesxccdf_org.ssgproject.content_rule_accounts_root_path_dirs_no_write medium

Ensure that Root's Path Does Not Include World or Group-Writable Directories

Rule IDxccdf_org.ssgproject.content_rule_accounts_root_path_dirs_no_write
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, CCI-000366, 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-6(a), CM-6(a), PR.IP-1, 6.2.3

Description

For each element in root's path, run:

# ls -ld DIR
and ensure that write permissions are disabled for group and other.

Rationale

Such entries increase the risk that root could execute code provided by unprivileged users, and potentially malicious code.

Ensure the Default Bash Umask is Set Correctlyxccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc medium

Ensure the Default Bash Umask is Set Correctly

Rule IDxccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R35), 18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, Req-8.6.1, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, 5.4.4

Description

To ensure the default umask for users of the Bash shell is set properly, add or correct the umask setting in /etc/bashrc to read as follows:

umask 027

Rationale

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask in /etc/bashrc is already set
  ansible.builtin.lineinfile:
    path: /etc/bashrc
    regexp: ^(\s*)umask\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/bashrc
  ansible.builtin.replace:
    path: /etc/bashrc
    regexp: ^(\s*)umask(\s+).*
    replace: \g<1>umask\g<2>{{ var_accounts_user_umask }}
  when: umask_replace.found > 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/bashrc
    line: umask {{ var_accounts_user_umask }}
  when: umask_replace.found == 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)


var_accounts_user_umask='027'






grep -q "^\s*umask" /etc/bash.bashrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/bash.bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bash.bashrc
fi
Ensure the Default C Shell Umask is Set Correctlyxccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc medium

Ensure the Default C Shell Umask is Set Correctly

Rule IDxccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, 5.4.4

Description

To ensure the default umask for users of the C shell is set properly, add or correct the umask setting in /etc/csh.cshrc to read as follows:

umask 027

Rationale

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask in /etc/csh.cshrc is already set
  ansible.builtin.lineinfile:
    path: /etc/csh.cshrc
    regexp: ^(\s*)umask\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/csh.cshrc
  ansible.builtin.replace:
    path: /etc/csh.cshrc
    regexp: ^(\s*)umask(\s+).*
    replace: \g<1>umask\g<2>{{ var_accounts_user_umask }}
  when: umask_replace.found > 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/csh.cshrc
    line: umask {{ var_accounts_user_umask }}
  when: umask_replace.found == 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)


var_accounts_user_umask='027'


grep -q "^\s*umask" /etc/csh.cshrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/csh.cshrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/csh.cshrc
fi
Ensure the Default Umask is Set Correctly in /etc/profilexccdf_org.ssgproject.content_rule_accounts_umask_etc_profile medium

Ensure the Default Umask is Set Correctly in /etc/profile

Rule IDxccdf_org.ssgproject.content_rule_accounts_umask_etc_profile
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R35), 18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, Req-8.6.1, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, 5.4.4

Description

To ensure the default umask controlled by /etc/profile is set properly, add or correct the umask setting in /etc/profile to read as follows:

umask 027

Rationale

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask is already set
  ansible.builtin.lineinfile:
    path: /etc/profile
    regexp: (^[\s]*umask)\s+(\d+)
    state: absent
  check_mode: true
  changed_when: false
  register: result_umask_is_set
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/profile
  ansible.builtin.replace:
    path: /etc/profile
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Append user umask in /etc/profile
  ansible.builtin.lineinfile:
    create: true
    path: /etc/profile
    line: umask {{ var_accounts_user_umask }}
  when: result_umask_is_set.found == 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)


var_accounts_user_umask='027'


grep -qE '^[^#]*umask' /etc/profile && \
  sed -i "s/umask.*/umask $var_accounts_user_umask/g" /etc/profile
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/profile
fi
Ensure the Default Umask is Set Correctly For Interactive Usersxccdf_org.ssgproject.content_rule_accounts_umask_interactive_users medium

Ensure the Default Umask is Set Correctly For Interactive Users

Rule IDxccdf_org.ssgproject.content_rule_accounts_umask_interactive_users
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000366, CCI-001814, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00228, 5.4.4

Description

Remove the UMASK environment variable from all interactive users initialization files.

Rationale

The umask controls the default access mode assigned to newly created files. A umask of 077 limits new files to mode 700 or less permissive. Although umask can be represented as a four-digit number, the first digit representing special access modes is typically ignored or required to be 0. This requirement applies to the globally configured system defaults and the local interactive user defaults for each account on the system.

Set Interactive Session Timeoutxccdf_org.ssgproject.content_rule_accounts_tmout medium

Set Interactive Session Timeout

Rule IDxccdf_org.ssgproject.content_rule_accounts_tmout
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R29), 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.11, CCI-000057, CCI-001133, CCI-002361, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-12, SC-10, AC-2(5), CM-6(a), PR.AC-7, FMT_MOF_EXT.1, Req-8.6.1, SRG-OS-000163-GPOS-00072, SRG-OS-000029-GPOS-00010, SRG-OS-000163-VMM-000700, SRG-OS-000279-VMM-001010, UBTU-20-010013, 5.4.5

Description

Setting the TMOUT option in /etc/profile ensures that all user sessions will terminate based on inactivity. The value of TMOUT should be exported and read only. The TMOUT setting in a file loaded by /etc/profile, e.g. /etc/profile.d/tmout.sh should read as follows:

TMOUT=600
readonly TMOUT export TMOUT

Rationale

Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended.

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_accounts_tmout='600'


# if 0, no occurence of tmout found, if 1, occurence found
tmout_found=0

for f in /etc/bash.bashrc /etc/profile /etc/profile.d/*.sh; do
    if grep --silent '^\s*TMOUT' $f; then
        sed -i -E "s/^(\s*)TMOUT\s*=\s*(\w|\$)*(.*)$/\1TMOUT=$var_accounts_tmout\3/g" $f
        tmout_found=1
        if ! grep --silent '^\s*readonly TMOUT' $f ; then
            echo "readonly TMOUT" >> $f
        fi
        if ! grep --silent '^\s*export TMOUT' $f ; then
            echo "export TMOUT" >> $f
        fi
    fi
done

if [ $tmout_found -eq 0 ]; then
        echo -e "\n# Set TMOUT to $var_accounts_tmout per security requirements" >> /etc/profile.d/tmout.sh
        echo "TMOUT=$var_accounts_tmout" >> /etc/profile.d/tmout.sh
        echo "readonly TMOUT" >> /etc/profile.d/tmout.sh
        echo "export TMOUT" >> /etc/profile.d/tmout.sh
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
User Initialization Files Must Be Group-Owned By The Primary Userxccdf_org.ssgproject.content_rule_accounts_user_dot_group_ownership medium

User Initialization Files Must Be Group-Owned By The Primary User

Rule IDxccdf_org.ssgproject.content_rule_accounts_user_dot_group_ownership
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.7

Description

Change the group owner of interactive users files to the group found in

/etc/passwd
for the user. To change the group owner of a local interactive user home directory, use the following command:
$ sudo chgrp USER_GROUP /home/USER/.INIT_FILE
This rule ensures every initialization file related to an interactive user is group-owned by an interactive user.

Rationale

Local initialization files for interactive users are used to configure the user's shell environment upon logon. Malicious modification of these files could compromise accounts upon logon.

Warnings
warning  Due to OVAL limitation, this rule can report a false negative in a specific situation where two interactive users swap the group-ownership of their respective initialization files.
User Initialization Files Must Be Owned By the Primary Userxccdf_org.ssgproject.content_rule_accounts_user_dot_user_ownership medium

User Initialization Files Must Be Owned By the Primary User

Rule IDxccdf_org.ssgproject.content_rule_accounts_user_dot_user_ownership
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.7

Description

Set the owner of the user initialization files for interactive users to the primary owner with the following command:

$ sudo chown USER /home/USER/.*
This rule ensures every initialization file related to an interactive user is owned by an interactive user.

Rationale

Local initialization files are used to configure the user's shell environment upon logon. Malicious modification of these files could compromise accounts upon logon.

Warnings
warning  Due to OVAL limitation, this rule can report a false negative in a specific situation where two interactive users swap the ownership of their respective initialization files.
All Interactive Users Home Directories Must Existxccdf_org.ssgproject.content_rule_accounts_user_interactive_home_directory_exists medium

All Interactive Users Home Directories Must Exist

Rule IDxccdf_org.ssgproject.content_rule_accounts_user_interactive_home_directory_exists
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.4

Description

Create home directories to all interactive users that currently do not have a home directory assigned. Use the following commands to create the user home directory assigned in /etc/passwd:

$ sudo mkdir /home/USER

Rationale

If a local interactive user has a home directory defined that does not exist, the user may be given access to the / directory as the current working directory upon logon. This could create a Denial of Service because the user would not be able to access their logon configuration files, and it may give them visibility to system files they normally would not be able to access.

All Interactive User Home Directories Must Have mode 0750 Or Less Permissivexccdf_org.ssgproject.content_rule_file_permissions_home_directories medium

All Interactive User Home Directories Must Have mode 0750 Or Less Permissive

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_home_directories
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.5

Description

Change the mode of interactive users home directories to 0750. To change the mode of interactive users home directory, use the following command:

$ sudo chmod 0750 /home/USER

Rationale

Excessive permissions on local interactive user home directories may allow unauthorized access to user files by other users.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Test for existence home directories to avoid creating them.
  ansible.builtin.stat:
    path: '{{ item.value[4] }}'
  register: path_exists
  loop: '{{ local_users }}'
  when:
  - item.value[1]|int >= 1000
  - item.value[1]|int != 65534
  tags:
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive local users have proper permissions on their respective
    home directories
  ansible.builtin.file:
    path: '{{ item.0.value[4] }}'
    mode: u-s,g-w-s,o=-
    follow: false
    recurse: false
  loop: '{{ local_users|zip(path_exists.results)|list }}'
  when: item.1.stat is defined and item.1.stat.exists
  tags:
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict

for home_dir in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $6 }' /etc/passwd); do
    # Only update the permissions when necessary. This will avoid changing the inode timestamp when
    # the permission is already defined as expected, therefore not impacting in possible integrity
    # check systems that also check inodes timestamps.
    find "$home_dir" -maxdepth 0 -perm /7027 -exec chmod u-s,g-w-s,o=- {} \;
done
Ensure AppArmor is enabled in the bootloader configurationxccdf_org.ssgproject.content_rule_grub2_enable_apparmor medium

Ensure AppArmor is enabled in the bootloader configuration

Rule IDxccdf_org.ssgproject.content_rule_grub2_enable_apparmor
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1.7.1.2

Description

Configure AppArmor to be enabled at boot time and verify that it has not been overwritten by the bootloader boot parameters. Note: This recommendation is designed around the grub bootloader, if LILO or another bootloader is in use in your environment, enact equivalent settings.

Rationale

AppArmor must be enabled at boot time in your bootloader configuration to ensure that the controls it provides are not overridden.

Remediation Shell script:   (show)


# Correct the form of default kernel command line in GRUB
if grep -q '^GRUB_CMDLINE_LINUX=.*apparmor=.*"'  '/etc/default/grub' ; then
       # modify the GRUB command-line if an apparmor= arg already exists
       sed -i "s/\(^GRUB_CMDLINE_LINUX=\".*\)apparmor=[^[:space:]]\+\(.*\"\)/\1apparmor=1\2/"  '/etc/default/grub'
else
       # no apparmor=arg is present, append it
       sed -i "s/\(^GRUB_CMDLINE_LINUX=\".*\)\"/\1 apparmor=1\"/"  '/etc/default/grub'
fi
# Correct the form of default kernel command line in GRUB
if grep -q '^GRUB_CMDLINE_LINUX=.*security=.*"'  '/etc/default/grub' ; then
       # modify the GRUB command-line if an security= arg already exists
       sed -i "s/\(^GRUB_CMDLINE_LINUX=\".*\)security=[^[:space:]]\+\(.*\"\)/\1security=apparmor\2/"  '/etc/default/grub'
else
       # no security=arg is present, append it
       sed -i "s/\(^GRUB_CMDLINE_LINUX=\".*\)\"/\1 security=apparmor\"/"  '/etc/default/grub'
fi


update-grub
Verify /boot/grub/grub.cfg User Ownershipxccdf_org.ssgproject.content_rule_file_owner_grub2_cfg medium

Verify /boot/grub/grub.cfg User Ownership

Rule IDxccdf_org.ssgproject.content_rule_file_owner_grub2_cfg
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.4.5, CCI-000225, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-7.1, 1.5.2

Description

The file /boot/grub/grub.cfg should be owned by the root user to prevent destruction or modification of the file. To properly set the owner of /boot/grub/grub.cfg, run the command:

$ sudo chown root /boot/grub/grub.cfg 

Rationale

Only root should be able to modify important boot parameters.

Verify /boot/grub/grub.cfg Permissionsxccdf_org.ssgproject.content_rule_file_permissions_grub2_cfg medium

Verify /boot/grub/grub.cfg Permissions

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_grub2_cfg
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.4.5, CCI-000225, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 1.5.2

Description

File permissions for /boot/grub/grub.cfg should be set to 600. To properly set the permissions of /boot/grub/grub.cfg, run the command:

$ sudo chmod 600 /boot/grub/grub.cfg

Rationale

Proper permissions ensure that only the root user can modify important boot parameters.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Test for existence /boot/grub/grub.cfg
  stat:
    path: /boot/grub/grub.cfg
  register: file_exists
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2-common" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /boot/grub/grub.cfg
  file:
    path: /boot/grub/grub.cfg
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2-common" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /sys/firmware/efi ] && dpkg-query --show --showformat='${db:Status-Status}\n' 'grub2-common' 2>/dev/null | grep -q installed && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

chmod u-xs,g-xwrs,o-xwrt /boot/grub/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Set Boot Loader Password in grub2xccdf_org.ssgproject.content_rule_grub2_password high

Set Boot Loader Password in grub2

Rule IDxccdf_org.ssgproject.content_rule_grub2_password
Result
fail
Time2023-03-25T10:35:07
Severityhigh
Identifiers and References

References:  BP28(R17), 1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, UBTU-20-010009, 1.5.1

Description

The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

Since plaintext passwords are a security risk, generate a hash for the password by running the following command:

# grub2-mkpasswd-pbkdf2
When prompted, enter the password that was selected.

Using the hash from the output, modify the /etc/grub.d/40_custom file with the following content:
set superusers="boot"
password_pbkdf2 boot grub.pbkdf2.sha512.VeryLongString
NOTE: the bootloader superuser account and password MUST differ from the root account and password. Once the superuser password has been added, update the grub.cfg file by running:
update-grub 

Rationale

Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.

Warnings
warning  To prevent hard-coded passwords, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above. Also, do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.
Set the UEFI Boot Loader Passwordxccdf_org.ssgproject.content_rule_grub2_uefi_password high

Set the UEFI Boot Loader Password

Rule IDxccdf_org.ssgproject.content_rule_grub2_uefi_password
Result
notapplicable
Time2023-03-25T10:35:07
Severityhigh
Identifiers and References

References:  BP28(R17), 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), PR.AC-4, PR.AC-6, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, UBTU-20-010009

Description

The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

Since plaintext passwords are a security risk, generate a hash for the password by running the following command:

# grub2-mkpasswd-pbkdf2
When prompted, enter the password that was selected.

Using the hash from the output, modify the /etc/grub.d/40_custom file with the following content:
set superusers="boot"
password_pbkdf2 boot grub.pbkdf2.sha512.VeryLongString
NOTE: the bootloader superuser account and password MUST differ from the root account and password. Once the superuser password has been added, update the grub.cfg file by running:
update-grub 

Rationale

Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.

Warnings
warning  To prevent hard-coded passwords, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above. Also, do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.
Ensure Logs Sent To Remote Hostxccdf_org.ssgproject.content_rule_rsyslog_remote_loghost medium

Ensure Logs Sent To Remote Host

Rule IDxccdf_org.ssgproject.content_rule_rsyslog_remote_loghost
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R7), NT28(R43), NT12(R5), 1, 13, 14, 15, 16, 2, 3, 5, 6, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS05.04, DSS05.07, MEA02.01, CCI-000366, CCI-001348, CCI-000136, CCI-001851, 164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(B), 164.308(a)(5)(ii)(C), 164.308(a)(6)(ii), 164.308(a)(8), 164.310(d)(2)(iii), 164.312(b), 164.314(a)(2)(i)(C), 164.314(a)(2)(iii), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 7.1, SR 7.2, 0988, 1405, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.17.2.1, CIP-003-8 R5.2, CIP-004-6 R3.3, CM-6(a), AU-4(1), AU-9(2), PR.DS-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000479-GPOS-00224, SRG-OS-000480-GPOS-00227, SRG-OS-000342-GPOS-00133, SRG-OS-000032-VMM-000130, 4.2.1.5

Description

To configure rsyslog to send logs to a remote log server, open /etc/rsyslog.conf and read and understand the last section of the file, which describes the multiple directives necessary to activate remote logging. Along with these other directives, the system can be configured to forward its logs to a particular log server by adding or correcting one of the following lines, substituting logcollector appropriately. The choice of protocol depends on the environment of the system; although TCP and RELP provide more reliable message delivery, they may not be supported in all environments.
To use UDP for log message delivery:

*.* @logcollector

To use TCP for log message delivery:
*.* @@logcollector

To use RELP for log message delivery:
*.* :omrelp:logcollector

There must be a resolvable DNS CNAME or Alias record set to "logcollector" for logs to be sent correctly to the centralized logging utility.

Rationale

A log server (loghost) receives syslog messages from one or more systems. This data can be used as an additional log source in the event a system is compromised and its local logs are suspect. Forwarding log messages to a remote loghost also provides system administrators with a centralized place to view the status of multiple hosts within the enterprise.

Warnings
warning  It is important to configure queues in case the client is sending log messages to a remote server. If queues are not configured, the system will stop functioning when the connection to the remote server is not available. Please consult Rsyslog documentation for more information about configuration of queues. The example configuration which should go into /etc/rsyslog.conf can look like the following lines:
$ActionQueueType LinkedList
$ActionQueueFileName queuefilename
$ActionQueueMaxDiskSpace 1g
$ActionQueueSaveOnShutdown on
$ActionResumeRetryCount -1
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

rsyslog_remote_loghost_address='logcollector'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/rsyslog.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^\*\.\*")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "@@$rsyslog_remote_loghost_address"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^\*\.\*\\>" "/etc/rsyslog.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^\*\.\*\\>.*/$escaped_formatted_output/gi" "/etc/rsyslog.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/rsyslog.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure rsyslog is Installedxccdf_org.ssgproject.content_rule_package_rsyslog_installed medium

Ensure rsyslog is Installed

Rule IDxccdf_org.ssgproject.content_rule_package_rsyslog_installed
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R5), NT28(R46), 1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-001311, CCI-001312, CCI-000366, 164.312(a)(2)(ii), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), PR.PT-1, FTP_ITC_EXT.1.1, SRG-OS-000479-GPOS-00224, SRG-OS-000051-GPOS-00024, SRG-OS-000480-GPOS-00227, 4.2.1.1

Description

Rsyslog is installed by default. The rsyslog package can be installed with the following command:

 $ apt-get install rsyslog

Rationale

The rsyslog package provides the rsyslog daemon, which provides system logging services.

Enable rsyslog Servicexccdf_org.ssgproject.content_rule_service_rsyslog_enabled medium

Enable rsyslog Service

Rule IDxccdf_org.ssgproject.content_rule_service_rsyslog_enabled
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  BP28(R5), NT28(R46), 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, CCI-001311, CCI-001312, CCI-001557, CCI-001851, CCI-000366, 164.312(a)(2)(ii), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, A.17.2.1, CM-6(a), AU-4(1), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.DS-4, PR.PT-1, SRG-OS-000480-GPOS-00227, UBTU-20-010432, 4.2.1.2

Description

The rsyslog service provides syslog-style logging by default on Ubuntu 20.04. The rsyslog service can be enabled with the following command:

$ sudo systemctl enable rsyslog.service

Rationale

The rsyslog service must be running in order to provide logging services, which are essential to system administration.

Verify iptables Enabledxccdf_org.ssgproject.content_rule_service_iptables_enabled medium

Verify iptables Enabled

Rule IDxccdf_org.ssgproject.content_rule_service_iptables_enabled
Result
fail
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  1, 11, 12, 13, 14, 15, 16, 18, 3, 4, 6, 8, 9, APO01.06, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3, AC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a), DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, 3.5.3.1.1

Description

The iptables service can be enabled with the following command:

$ sudo systemctl enable iptables.service

Rationale

The iptables service provides the system's host-based firewalling capability for IPv4 and ICMP.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include enable_iptables

class enable_iptables {
  service {'iptables':
    enable => true,
    ensure => 'running',
  }
}
Remediation script:   (show)


[customizations.services]
enabled = ["iptables"]
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service iptables
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service iptables
    service:
      name: iptables
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"iptables" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-4
  - NIST-800-53-CA-3(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(21)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_iptables_enabled
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'iptables.service'
"$SYSTEMCTL_EXEC" start 'iptables.service'
"$SYSTEMCTL_EXEC" enable 'iptables.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Set Default ip6tables Policy for Incoming Packetsxccdf_org.ssgproject.content_rule_set_ip6tables_default_rule medium

Set Default ip6tables Policy for Incoming Packets

Rule IDxccdf_org.ssgproject.content_rule_set_ip6tables_default_rule
Result
notchecked
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3, AC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a), PR.IP-1, PR.PT-3, Req-1.4.1, 3.5.3.3.1

Description

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/ip6tables:

:INPUT DROP [0:0]
If changes were required, reload the ip6tables rules:
$ sudo service ip6tables reload

Rationale

In ip6tables, the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

Evaluation messages
info 
No candidate or applicable check found.
Set Default iptables Policy for Incoming Packetsxccdf_org.ssgproject.content_rule_set_iptables_default_rule medium

Set Default iptables Policy for Incoming Packets

Rule IDxccdf_org.ssgproject.content_rule_set_iptables_default_rule
Result
notchecked
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CA-3(5), CM-7(b), SC-7(23), CM-6(a), PR.IP-1, PR.PT-3, 3.5.3.2.1

Description

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/iptables:

:INPUT DROP [0:0]

Rationale

In iptables the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

Evaluation messages
info 
No candidate or applicable check found.
Install iptables Packagexccdf_org.ssgproject.content_rule_package_iptables_installed medium

Install iptables Package

Rule IDxccdf_org.ssgproject.content_rule_package_iptables_installed
Result
pass
Time2023-03-25T10:35:07
Severitymedium
Identifiers and References

References:  CM-6(a), Req-1.4.1, SRG-OS-000480-GPOS-00227, 3.5.3.1.1

Description

The iptables package can be installed with the following command:

$ apt-get install iptables

Rationale

iptables controls the Linux kernel network packet filtering code. iptables allows system operators to set up firewalls and IP masquerading, etc.

Configure Accepting Router Advertisements on All IPv6 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra medium

Configure Accepting Router Advertisements on All IPv6 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.9

Description

To set the runtime status of the net.ipv6.conf.all.accept_ra kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_ra=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_ra = 0

Rationale

An illicit router advertisement message could result in a man-in-the-middle attack.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.all.accept_ra from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_ra
    replace: '#net.ipv6.conf.all.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_ra is set
  sysctl:
    name: net.ipv6.conf.all.accept_ra
    value: '{{ sysctl_net_ipv6_conf_all_accept_ra_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv6_conf_all_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra="$sysctl_net_ipv6_conf_all_accept_ra_value"

#
# If net.ipv6.conf.all.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv6.conf.all.accept_ra\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Accepting ICMP Redirects for All IPv6 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects medium

Disable Accepting ICMP Redirects for All IPv6 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.2

Description

To set the runtime status of the net.ipv6.conf.all.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_redirects = 0

Rationale

An illicit ICMP redirect message could result in a man-in-the-middle attack.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.all.accept_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_redirects
    replace: '#net.ipv6.conf.all.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_all_accept_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv6_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_redirects="$sysctl_net_ipv6_conf_all_accept_redirects_value"

#
# If net.ipv6.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_redirects = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_redirects\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv6.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route medium

Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.1

Description

To set the runtime status of the net.ipv6.conf.all.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_source_route = 0

Rationale

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_source_route
    replace: '#net.ipv6.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_all_accept_source_route_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv6_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_source_route="$sysctl_net_ipv6_conf_all_accept_source_route_value"

#
# If net.ipv6.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_source_route = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_source_route\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv6.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for IPv6 Forwardingxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_forwarding medium

Disable Kernel Parameter for IPv6 Forwarding

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_forwarding
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.2.2

Description

To set the runtime status of the net.ipv6.conf.all.forwarding kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.forwarding=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.forwarding = 0

Rationale

IP forwarding permits the kernel to forward packets from one network interface to another. The ability to forward packets between two networks is only appropriate for systems acting as routers.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.forwarding.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding

- name: Comment out any occurrences of net.ipv6.conf.all.forwarding from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.forwarding
    replace: '#net.ipv6.conf.all.forwarding'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding
- name: XCCDF Value sysctl_net_ipv6_conf_all_forwarding_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_forwarding_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.forwarding is set
  sysctl:
    name: net.ipv6.conf.all.forwarding
    value: '{{ sysctl_net_ipv6_conf_all_forwarding_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.forwarding from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.forwarding.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.forwarding" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv6_conf_all_forwarding_value='0'


#
# Set runtime for net.ipv6.conf.all.forwarding
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.forwarding="$sysctl_net_ipv6_conf_all_forwarding_value"

#
# If net.ipv6.conf.all.forwarding present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.forwarding = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.forwarding")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_forwarding_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.forwarding\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv6.conf.all.forwarding\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Accepting Router Advertisements on all IPv6 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra medium

Disable Accepting Router Advertisements on all IPv6 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.9

Description

To set the runtime status of the net.ipv6.conf.default.accept_ra kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_ra = 0

Rationale

An illicit router advertisement message could result in a man-in-the-middle attack.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.default.accept_ra from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_ra
    replace: '#net.ipv6.conf.default.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_ra is set
  sysctl:
    name: net.ipv6.conf.default.accept_ra
    value: '{{ sysctl_net_ipv6_conf_default_accept_ra_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv6_conf_default_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra="$sysctl_net_ipv6_conf_default_accept_ra_value"

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv6.conf.default.accept_ra\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects medium

Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.2

Description

To set the runtime status of the net.ipv6.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_redirects = 0

Rationale

An illicit ICMP redirect message could result in a man-in-the-middle attack.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_redirects
    replace: '#net.ipv6.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_default_accept_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv6_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects="$sysctl_net_ipv6_conf_default_accept_redirects_value"

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_redirects\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv6.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route medium

Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.1

Description

To set the runtime status of the net.ipv6.conf.default.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_source_route = 0

Rationale

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
    replace: '#net.ipv6.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_default_accept_source_route_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Accepting ICMP Redirects for All IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects medium

Disable Accepting ICMP Redirects for All IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, 5.10.1.1, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000366, CCI-001503, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.2

Description

To set the runtime status of the net.ipv4.conf.all.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_redirects = 0

Rationale

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required."

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.accept_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_redirects
    replace: '#net.ipv4.conf.all.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_all_accept_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects="$sysctl_net_ipv4_conf_all_accept_redirects_value"

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_redirects\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route medium

Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.1

Description

To set the runtime status of the net.ipv4.conf.all.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_source_route = 0

Rationale

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv4 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_source_route
    replace: '#net.ipv4.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_all_accept_source_route_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route="$sysctl_net_ipv4_conf_all_accept_source_route_value"

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_source_route\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians unknown

Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians
Result
fail
Time2023-03-25T10:35:08
Severityunknown
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000126, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), SC-5(3)(a), DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.4

Description

To set the runtime status of the net.ipv4.conf.all.log_martians kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.log_martians=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.log_martians = 1

Rationale

The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.all.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.log_martians
    replace: '#net.ipv4.conf.all.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_all_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.log_martians is set
  sysctl:
    name: net.ipv4.conf.all.log_martians
    value: '{{ sysctl_net_ipv4_conf_all_log_martians_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.log_martians" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_all_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians="$sysctl_net_ipv4_conf_all_log_martians_value"

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.log_martians\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.all.log_martians\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter medium

Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.7

Description

To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.rp_filter = 1

Rationale

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.all.rp_filter from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.rp_filter
    replace: '#net.ipv4.conf.all.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: '{{ sysctl_net_ipv4_conf_all_rp_filter_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects medium

Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-001503, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.3

Description

To set the runtime status of the net.ipv4.conf.all.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.secure_redirects = 0

Rationale

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.secure_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.secure_redirects
    replace: '#net.ipv4.conf.all.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.all.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_all_secure_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.secure_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_all_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects="$sysctl_net_ipv4_conf_all_secure_redirects_value"

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.secure_redirects\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.all.secure_redirects\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects medium

Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.2

Description

To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_redirects = 0

Rationale

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_redirects
    replace: '#net.ipv4.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_default_accept_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects="$sysctl_net_ipv4_conf_default_accept_redirects_value"

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_redirects\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route medium

Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.1

Description

To set the runtime status of the net.ipv4.conf.default.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_source_route = 0

Rationale

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures.
Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_source_route
    replace: '#net.ipv4.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_default_accept_source_route_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route="$sysctl_net_ipv4_conf_default_accept_source_route_value"

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_source_route\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians unknown

Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians
Result
fail
Time2023-03-25T10:35:08
Severityunknown
Identifiers and References

References:  1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000126, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), SC-5(3)(a), DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.4

Description

To set the runtime status of the net.ipv4.conf.default.log_martians kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.log_martians=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.log_martians = 1

Rationale

The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.default.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.log_martians
    replace: '#net.ipv4.conf.default.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_default_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.log_martians is set
  sysctl:
    name: net.ipv4.conf.default.log_martians
    value: '{{ sysctl_net_ipv4_conf_default_log_martians_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.log_martians" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_default_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.default.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.log_martians="$sysctl_net_ipv4_conf_default_log_martians_value"

#
# If net.ipv4.conf.default.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.log_martians = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.log_martians\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.default.log_martians\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter medium

Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.7

Description

To set the runtime status of the net.ipv4.conf.default.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.rp_filter = 1

Rationale

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.default.rp_filter from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.rp_filter
    replace: '#net.ipv4.conf.default.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
  sysctl:
    name: net.ipv4.conf.default.rp_filter
    value: '{{ sysctl_net_ipv4_conf_default_rp_filter_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.rp_filter" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_default_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter="$sysctl_net_ipv4_conf_default_rp_filter_value"

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.rp_filter\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.default.rp_filter\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Configure Kernel Parameter for Accepting Secure Redirects By Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects medium

Configure Kernel Parameter for Accepting Secure Redirects By Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.3

Description

To set the runtime status of the net.ipv4.conf.default.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.secure_redirects = 0

Rationale

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.secure_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.secure_redirects
    replace: '#net.ipv4.conf.default.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.default.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_default_secure_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.secure_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_conf_default_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects="$sysctl_net_ipv4_conf_default_secure_redirects_value"

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.secure_redirects\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.default.secure_redirects\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts medium

Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.5

Description

To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_echo_ignore_broadcasts = 1

Rationale

Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts
    replace: '#net.ipv4.icmp_echo_ignore_broadcasts'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: '{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_echo_ignore_broadcasts" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value='1'


#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts="$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_echo_ignore_broadcasts")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_echo_ignore_broadcasts\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.icmp_echo_ignore_broadcasts\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses unknown

Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses
Result
fail
Time2023-03-25T10:35:08
Severityunknown
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.6

Description

To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_ignore_bogus_error_responses = 1

Rationale

Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses
    from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses
    replace: '#net.ipv4.icmp_ignore_bogus_error_responses'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: '{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable Kernel Parameter to Use TCP Syncookies on Network Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies medium

Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, CCI-001095, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), SC-5(1), SC-5(2), SC-5(3)(a), CM-6(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, Req-1.4.1, SRG-OS-000480-GPOS-00227, SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00071, UBTU-20-010412, 3.3.8

Description

To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.tcp_syncookies=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.tcp_syncookies = 1

Rationale

A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.tcp_syncookies.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-UBTU-20-010412
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: Comment out any occurrences of net.ipv4.tcp_syncookies from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.tcp_syncookies
    replace: '#net.ipv4.tcp_syncookies'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-UBTU-20-010412
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies
- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: '{{ sysctl_net_ipv4_tcp_syncookies_value }}'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-UBTU-20-010412
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done
sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects medium

Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.2.1

Description

To set the runtime status of the net.ipv4.conf.all.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.send_redirects = 0

Rationale

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.send_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.send_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.send_redirects
    replace: '#net.ipv4.conf.all.send_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Ensure sysctl net.ipv4.conf.all.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.all.send_redirects
    value: '0'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.send_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects="0"

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.send_redirects\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.all.send_redirects\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Defaultxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects medium

Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.2.1

Description

To set the runtime status of the net.ipv4.conf.default.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.send_redirects = 0

Rationale

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.send_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.send_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.send_redirects
    replace: '#net.ipv4.conf.default.send_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Ensure sysctl net.ipv4.conf.default.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.default.send_redirects
    value: '0'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.send_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set runtime for net.ipv4.conf.default.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects="0"

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.send_redirects\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.conf.default.send_redirects\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Kernel Parameter for IP Forwarding on IPv4 Interfacesxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward medium

Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces

Rule IDxccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.3.1, Req-1.3.2, SRG-OS-000480-GPOS-00227, 3.2.2

Description

To set the runtime status of the net.ipv4.ip_forward kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.ip_forward=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.ip_forward = 0

Rationale

Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.

Warnings
warning  Certain technologies such as virtual machines, containers, etc. rely on IPv4 forwarding to enable and use networking. Disabling IPv4 forwarding would cause those technologies to stop working. Therefore, this rule should not be used in profiles or benchmarks that target usage of IPv4 forwarding.
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.ip_forward.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Comment out any occurrences of net.ipv4.ip_forward from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.ip_forward
    replace: '#net.ipv4.ip_forward'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Ensure sysctl net.ipv4.ip_forward is set to 0
  sysctl:
    name: net.ipv4.ip_forward
    value: '0'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_forward.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_forward" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set runtime for net.ipv4.ip_forward
#
/sbin/sysctl -q -n -w net.ipv4.ip_forward="0"

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_forward")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_forward\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^net.ipv4.ip_forward\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Install nftables Packagexccdf_org.ssgproject.content_rule_package_nftables_installed medium

Install nftables Package

Rule IDxccdf_org.ssgproject.content_rule_package_nftables_installed
Result
fail
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  3.5.2.1

Description

nftables provides a new in-kernel packet classification framework that is based on a network-specific Virtual Machine (VM) and a new nft userspace command line tool. nftables reuses the existing Netfilter subsystems such as the existing hook infrastructure, the connection tracking system, NAT, userspace queuing and logging subsystem. The nftables package can be installed with the following command:

$ apt-get install nftables

Rationale

nftables is a subsystem of the Linux kernel that can protect against threats originating from within a corporate network to include malicious mobile code and poorly configured software on a host.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_nftables

class install_nftables {
  package { 'nftables':
    ensure => 'installed',
  }
}
Remediation script:   (show)


[[packages]]
name = "nftables"
version = "*"
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure nftables is installed
  package:
    name: nftables
    state: present
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_nftables_installed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

DEBIAN_FRONTEND=noninteractive apt-get install -y "nftables"
Uninstall nftables packagexccdf_org.ssgproject.content_rule_package_nftables_removed medium

Uninstall nftables package

Rule IDxccdf_org.ssgproject.content_rule_package_nftables_removed
Result
pass
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  3.5.3.1.2

Description

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames and is the successor to iptables. The nftables package can be removed with the following command:

$ apt-get remove nftables

Rationale

Running both firewalld and nftables may lead to conflict.

Verify nftables service disabledxccdf_org.ssgproject.content_rule_service_nftables_disabled medium

Verify nftables service disabled

Rule IDxccdf_org.ssgproject.content_rule_service_nftables_disabled
Result
pass
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  3.5.3.1.2

Description

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames and is the successor to iptables. The nftables package can be removed with the following command:

$ apt-get remove nftables

Rationale

Running both firewalld and nftables may lead to conflict.

Deactivate Wireless Network Interfacesxccdf_org.ssgproject.content_rule_wireless_disable_interfaces medium

Deactivate Wireless Network Interfaces

Rule IDxccdf_org.ssgproject.content_rule_wireless_disable_interfaces
Result
pass
Time2023-03-25T10:35:08
Severitymedium
Identifiers and References

References:  11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, 3.1.16, CCI-000085, CCI-002418, CCI-002421, CCI-001443, CCI-001444, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, 1315, 1319, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, AC-18(a), AC-18(3), CM-7(a), CM-7(b), CM-6(a), MP-7, PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.3.3, SRG-OS-000299-GPOS-00117, SRG-OS-000300-GPOS-00118, SRG-OS-000424-GPOS-00188, SRG-OS-000481-GPOS-000481, UBTU-20-010455, 3.1.2

Description

Deactivating wireless network interfaces should prevent normal usage of the wireless capability.

Configure the system to disable all wireless network interfaces with the following command:

$ sudo nmcli radio all off

Rationale

The use of wireless networking can introduce many different attack vectors into the organization's network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.

Verify Group Who Owns Backup group Filexccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group medium

Verify Group Who Owns Backup group File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.8

Description

To properly set the group owner of /etc/group-, run the command:

$ sudo chgrp root /etc/group-

Rationale

The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Verify Group Who Owns Backup gshadow Filexccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_gshadow medium

Verify Group Who Owns Backup gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_gshadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.3

Description

To properly set the group owner of /etc/gshadow-, run the command:

$ sudo chgrp shadow /etc/gshadow-

Rationale

The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.

Verify Group Who Owns Backup passwd Filexccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd medium

Verify Group Who Owns Backup passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.6

Description

To properly set the group owner of /etc/passwd-, run the command:

$ sudo chgrp root /etc/passwd-

Rationale

The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.

Verify User Who Owns Backup shadow Filexccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow medium

Verify User Who Owns Backup shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  SRG-OS-000480-GPOS-00227, 6.1.7

Description

To properly set the group owner of /etc/shadow-, run the command:

$ sudo chgrp shadow /etc/shadow-

Rationale

The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.

Verify Group Who Owns group Filexccdf_org.ssgproject.content_rule_file_groupowner_etc_group medium

Verify Group Who Owns group File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_group
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.5

Description

To properly set the group owner of /etc/group, run the command:

$ sudo chgrp root /etc/group

Rationale

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Verify Group Who Owns gshadow Filexccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow medium

Verify Group Who Owns gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 6.1.9

Description

To properly set the group owner of /etc/gshadow, run the command:

$ sudo chgrp shadow /etc/gshadow

Rationale

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

Verify Group Who Owns passwd Filexccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd medium

Verify Group Who Owns passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.2

Description

To properly set the group owner of /etc/passwd, run the command:

$ sudo chgrp root /etc/passwd

Rationale

The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.

Verify Group Who Owns shadow Filexccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow medium

Verify Group Who Owns shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.4

Description

To properly set the group owner of /etc/shadow, run the command:

$ sudo chgrp shadow /etc/shadow

Rationale

The /etc/shadow file stores password hashes. Protection of this file is critical for system security.

Verify User Who Owns Backup group Filexccdf_org.ssgproject.content_rule_file_owner_backup_etc_group medium

Verify User Who Owns Backup group File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_backup_etc_group
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.8

Description

To properly set the owner of /etc/group-, run the command:

$ sudo chown root /etc/group- 

Rationale

The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Verify User Who Owns Backup gshadow Filexccdf_org.ssgproject.content_rule_file_owner_backup_etc_gshadow medium

Verify User Who Owns Backup gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_backup_etc_gshadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.3

Description

To properly set the owner of /etc/gshadow-, run the command:

$ sudo chown root /etc/gshadow- 

Rationale

The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.

Verify User Who Owns Backup passwd Filexccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd medium

Verify User Who Owns Backup passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.6

Description

To properly set the owner of /etc/passwd-, run the command:

$ sudo chown root /etc/passwd- 

Rationale

The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.

Verify Group Who Owns Backup shadow Filexccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow medium

Verify Group Who Owns Backup shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.7

Description

To properly set the owner of /etc/shadow-, run the command:

$ sudo chown root /etc/shadow- 

Rationale

The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.

Verify User Who Owns group Filexccdf_org.ssgproject.content_rule_file_owner_etc_group medium

Verify User Who Owns group File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_group
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.5

Description

To properly set the owner of /etc/group, run the command:

$ sudo chown root /etc/group 

Rationale

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Verify User Who Owns gshadow Filexccdf_org.ssgproject.content_rule_file_owner_etc_gshadow medium

Verify User Who Owns gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_gshadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 6.1.9

Description

To properly set the owner of /etc/gshadow, run the command:

$ sudo chown root /etc/gshadow 

Rationale

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

Verify User Who Owns passwd Filexccdf_org.ssgproject.content_rule_file_owner_etc_passwd medium

Verify User Who Owns passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_passwd
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.2

Description

To properly set the owner of /etc/passwd, run the command:

$ sudo chown root /etc/passwd 

Rationale

The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.

Verify User Who Owns shadow Filexccdf_org.ssgproject.content_rule_file_owner_etc_shadow medium

Verify User Who Owns shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_owner_etc_shadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.4

Description

To properly set the owner of /etc/shadow, run the command:

$ sudo chown root /etc/shadow 

Rationale

The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.

Verify Permissions on Backup group Filexccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group medium

Verify Permissions on Backup group File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.8

Description

To properly set the permissions of /etc/group-, run the command:

$ sudo chmod 0644 /etc/group-

Rationale

The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Verify Permissions on Backup gshadow Filexccdf_org.ssgproject.content_rule_file_permissions_backup_etc_gshadow medium

Verify Permissions on Backup gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_backup_etc_gshadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.3

Description

To properly set the permissions of /etc/gshadow-, run the command:

$ sudo chmod 0640 /etc/gshadow-

Rationale

The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.

Verify Permissions on Backup passwd Filexccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd medium

Verify Permissions on Backup passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.6

Description

To properly set the permissions of /etc/passwd-, run the command:

$ sudo chmod 0644 /etc/passwd-

Rationale

The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.

Verify Permissions on Backup shadow Filexccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow medium

Verify Permissions on Backup shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.7

Description

To properly set the permissions of /etc/shadow-, run the command:

$ sudo chmod 0640 /etc/shadow-

Rationale

The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.

Verify Permissions on group Filexccdf_org.ssgproject.content_rule_file_permissions_etc_group medium

Verify Permissions on group File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_group
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.5

Description

To properly set the permissions of /etc/passwd, run the command:

$ sudo chmod 0644 /etc/passwd

Rationale

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

Verify Permissions on gshadow Filexccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow medium

Verify Permissions on gshadow File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 6.1.9

Description

To properly set the permissions of /etc/gshadow, run the command:

$ sudo chmod 0640 /etc/gshadow

Rationale

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

Verify Permissions on passwd Filexccdf_org.ssgproject.content_rule_file_permissions_etc_passwd medium

Verify Permissions on passwd File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_passwd
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.2

Description

To properly set the permissions of /etc/passwd, run the command:

$ sudo chmod 0644 /etc/passwd

Rationale

If the /etc/passwd file is writable by a group-owner or the world the risk of its compromise is increased. The file contains the list of accounts on the system and associated information, and protection of this file is critical for system security.

Verify Permissions on shadow Filexccdf_org.ssgproject.content_rule_file_permissions_etc_shadow medium

Verify Permissions on shadow File

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_etc_shadow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, SRG-OS-000480-GPOS-00227, 6.1.4

Description

To properly set the permissions of /etc/shadow, run the command:

$ sudo chmod 0640 /etc/shadow

Rationale

The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.

Verify that All World-Writable Directories Have Sticky Bits Setxccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits medium

Verify that All World-Writable Directories Have Sticky Bits Set

Rule IDxccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits
Result
pass
Time2023-03-25T10:35:32
Severitymedium
Identifiers and References

References:  BP28(R40), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-001090, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000138-GPOS-00069, UBTU-20-010411, 1.1.22

Description

When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may remove any file in the directory. Setting the sticky bit prevents users from removing each other's files. In cases where there is no reason for a directory to be world-writable, a better solution is to remove that permission rather than to set the sticky bit. However, if a directory is used by a particular application, consult that application's documentation instead of blindly changing modes.
To set the sticky bit on a world-writable directory DIR, run the following command:

$ sudo chmod +t DIR

Rationale

Failing to set the sticky bit on public directories allows unauthorized users to delete files in the directory structure.

The only authorized public directories are those temporary directories supplied with the system, or those designed to be temporary file repositories. The setting is normally reserved for directories used by the system, by users for temporary file storage (such as /tmp), and for directories requiring global read/write access.

Ensure No World-Writable Files Existxccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable medium

Ensure No World-Writable Files Exist

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable
Result
pass
Time2023-03-25T10:36:02
Severitymedium
Identifiers and References

References:  BP28(R40), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 6.1.10

Description

It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific applications before making changes. Also, monitor for recurring world-writable files, as these may be symptoms of a misconfigured application or user account. Finally, this applies to real files and not virtual files that are a part of pseudo file systems such as sysfs or procfs.

Rationale

Data in world-writable files can be modified by any user on the system. In almost all circumstances, files can be configured using a combination of user and group permissions to support whatever legitimate access is needed without the risk caused by world-writable files.

Ensure All Files Are Owned by a Userxccdf_org.ssgproject.content_rule_no_files_unowned_by_user medium

Ensure All Files Are Owned by a User

Rule IDxccdf_org.ssgproject.content_rule_no_files_unowned_by_user
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 12, 13, 14, 15, 16, 18, 3, 5, 9, APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, CCI-000366, CCI-002165, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 6.1.11

Description

If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate user. The following command will discover and print any files on local partitions which do not belong to a valid user:

$ df --local -P | awk {'if (NR!=1) print $6'} | sudo xargs -I '{}' find '{}' -xdev -nouser
To search all filesystems on a system including network mounted filesystems the following command can be run manually for each partition:
$ sudo find PARTITION -xdev -nouser

Rationale

Unowned files do not directly imply a security problem, but they are generally a sign that something is amiss. They may be caused by an intruder, by incorrect software installation or draft software removal, or by failure to remove all files belonging to a deleted account. The files should be repaired so they will not cause problems when accounts are created in the future, and the cause should be discovered and addressed.

Warnings
warning  For this rule to evaluate centralized user accounts, getent must be working properly so that running the command
getent passwd
returns a list of all users in your organization. If using the System Security Services Daemon (SSSD),
enumerate = true
must be configured in your organization's domain to return a complete list of users
warning  Enabling this rule will result in slower scan times depending on the size of your organization and number of centralized users.
Disable the Automounterxccdf_org.ssgproject.content_rule_service_autofs_disabled medium

Disable the Automounter

Rule IDxccdf_org.ssgproject.content_rule_service_autofs_disabled
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  1, 12, 15, 16, 5, APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.4.6, CCI-000366, CCI-000778, CCI-001958, 164.308(a)(3)(i), 164.308(a)(3)(ii)(A), 164.310(d)(1), 164.310(d)(2), 164.312(a)(1), 164.312(a)(2)(iv), 164.312(b), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.6, A.11.2.6, A.13.1.1, A.13.2.1, A.18.1.4, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-7(a), CM-7(b), CM-6(a), MP-7, PR.AC-1, PR.AC-3, PR.AC-6, PR.AC-7, SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227, 1.1.23

Description

The autofs daemon mounts and unmounts filesystems, such as user home directories shared via NFS, on demand. In addition, autofs can be used to handle removable media, and the default configuration provides the cdrom device as /misc/cd. However, this method of providing access to removable media is not common, so autofs can almost always be disabled if NFS is not in use. Even if NFS is required, it may be possible to configure filesystem mounts statically by editing /etc/fstab rather than relying on the automounter.

The autofs service can be disabled with the following command:

$ sudo systemctl mask --now autofs.service

Rationale

Disabling the automounter permits the administrator to statically control filesystem mounting through /etc/fstab.

Additionally, automatically mounting filesystems permits easy introduction of unknown devices, thereby facilitating malicious activity.

Disable Mounting of cramfsxccdf_org.ssgproject.content_rule_kernel_module_cramfs_disabled low

Disable Mounting of cramfs

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_cramfs_disabled
Result
fail
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000095-GPOS-00049, 1.1.1.1

Description

To configure the system to prevent the cramfs kernel module from being loaded, add the following line to the file /etc/modprobe.d/cramfs.conf:

install cramfs /bin/true
This effectively prevents usage of this uncommon filesystem. The cramfs filesystem type is a compressed read-only Linux filesystem embedded in small footprint systems. A cramfs image can be used without having to first decompress the image.

Rationale

Removing support for unneeded filesystem types reduces the local attack surface of the server.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'cramfs' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/cramfs.conf
    regexp: cramfs
    line: install cramfs /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_cramfs_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install cramfs" /etc/modprobe.d/cramfs.conf ; then
	
	sed -i 's#^install cramfs.*#install cramfs /bin/true#g' /etc/modprobe.d/cramfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/cramfs.conf
	echo "install cramfs /bin/true" >> /etc/modprobe.d/cramfs.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Mounting of freevxfsxccdf_org.ssgproject.content_rule_kernel_module_freevxfs_disabled low

Disable Mounting of freevxfs

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_freevxfs_disabled
Result
fail
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.2

Description

To configure the system to prevent the freevxfs kernel module from being loaded, add the following line to the file /etc/modprobe.d/freevxfs.conf:

install freevxfs /bin/true
This effectively prevents usage of this uncommon filesystem.

Rationale

Linux kernel modules which implement filesystems that are not needed by the local system should be disabled.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'freevxfs' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/freevxfs.conf
    regexp: freevxfs
    line: install freevxfs /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_freevxfs_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install freevxfs" /etc/modprobe.d/freevxfs.conf ; then
	
	sed -i 's#^install freevxfs.*#install freevxfs /bin/true#g' /etc/modprobe.d/freevxfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/freevxfs.conf
	echo "install freevxfs /bin/true" >> /etc/modprobe.d/freevxfs.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Mounting of hfsxccdf_org.ssgproject.content_rule_kernel_module_hfs_disabled low

Disable Mounting of hfs

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_hfs_disabled
Result
fail
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.4

Description

To configure the system to prevent the hfs kernel module from being loaded, add the following line to the file /etc/modprobe.d/hfs.conf:

install hfs /bin/true
This effectively prevents usage of this uncommon filesystem.

Rationale

Linux kernel modules which implement filesystems that are not needed by the local system should be disabled.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'hfs' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/hfs.conf
    regexp: hfs
    line: install hfs /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_hfs_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install hfs" /etc/modprobe.d/hfs.conf ; then
	
	sed -i 's#^install hfs.*#install hfs /bin/true#g' /etc/modprobe.d/hfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/hfs.conf
	echo "install hfs /bin/true" >> /etc/modprobe.d/hfs.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Mounting of hfsplusxccdf_org.ssgproject.content_rule_kernel_module_hfsplus_disabled low

Disable Mounting of hfsplus

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_hfsplus_disabled
Result
fail
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.5

Description

To configure the system to prevent the hfsplus kernel module from being loaded, add the following line to the file /etc/modprobe.d/hfsplus.conf:

install hfsplus /bin/true
This effectively prevents usage of this uncommon filesystem.

Rationale

Linux kernel modules which implement filesystems that are not needed by the local system should be disabled.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'hfsplus' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/hfsplus.conf
    regexp: hfsplus
    line: install hfsplus /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_hfsplus_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install hfsplus" /etc/modprobe.d/hfsplus.conf ; then
	
	sed -i 's#^install hfsplus.*#install hfsplus /bin/true#g' /etc/modprobe.d/hfsplus.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/hfsplus.conf
	echo "install hfsplus /bin/true" >> /etc/modprobe.d/hfsplus.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Mounting of jffs2xccdf_org.ssgproject.content_rule_kernel_module_jffs2_disabled low

Disable Mounting of jffs2

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_jffs2_disabled
Result
fail
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.3

Description

To configure the system to prevent the jffs2 kernel module from being loaded, add the following line to the file /etc/modprobe.d/jffs2.conf:

install jffs2 /bin/true
This effectively prevents usage of this uncommon filesystem.

Rationale

Linux kernel modules which implement filesystems that are not needed by the local system should be disabled.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'jffs2' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/jffs2.conf
    regexp: jffs2
    line: install jffs2 /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_jffs2_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install jffs2" /etc/modprobe.d/jffs2.conf ; then
	
	sed -i 's#^install jffs2.*#install jffs2 /bin/true#g' /etc/modprobe.d/jffs2.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/jffs2.conf
	echo "install jffs2 /bin/true" >> /etc/modprobe.d/jffs2.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Mounting of udfxccdf_org.ssgproject.content_rule_kernel_module_udf_disabled low

Disable Mounting of udf

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_udf_disabled
Result
fail
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.6

Description

To configure the system to prevent the udf kernel module from being loaded, add the following line to the file /etc/modprobe.d/udf.conf:

install udf /bin/true
This effectively prevents usage of this uncommon filesystem. The udf filesystem type is the universal disk format used to implement the ISO/IEC 13346 and ECMA-167 specifications. This is an open vendor filesystem type for data storage on a broad range of media. This filesystem type is neccessary to support writing DVDs and newer optical disc formats.

Rationale

Removing support for unneeded filesystem types reduces the local attack surface of the system.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'udf' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/udf.conf
    regexp: udf
    line: install udf /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_udf_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install udf" /etc/modprobe.d/udf.conf ; then
	
	sed -i 's#^install udf.*#install udf /bin/true#g' /etc/modprobe.d/udf.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/udf.conf
	echo "install udf /bin/true" >> /etc/modprobe.d/udf.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Modprobe Loading of USB Storage Driverxccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled medium

Disable Modprobe Loading of USB Storage Driver

Rule IDxccdf_org.ssgproject.content_rule_kernel_module_usb-storage_disabled
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  1, 12, 15, 16, 5, APO13.01, DSS01.04, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.21, CCI-000366, CCI-000778, CCI-001958, 164.308(a)(3)(i), 164.308(a)(3)(ii)(A), 164.310(d)(1), 164.310(d)(2), 164.312(a)(1), 164.312(a)(2)(iv), 164.312(b), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.6, A.11.2.6, A.13.1.1, A.13.2.1, A.18.1.4, A.6.2.1, A.6.2.2, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-7(a), CM-7(b), CM-6(a), MP-7, PR.AC-1, PR.AC-3, PR.AC-6, PR.AC-7, SRG-OS-000114-GPOS-00059, SRG-OS-000378-GPOS-00163, SRG-OS-000480-GPOS-00227, 1.1.24

Description

To prevent USB storage devices from being used, configure the kernel module loading system to prevent automatic loading of the USB storage driver. To configure the system to prevent the usb-storage kernel module from being loaded, add the following line to the file /etc/modprobe.d/usb-storage.conf:

install usb-storage /bin/true
This will prevent the modprobe program from loading the usb-storage module, but will not prevent an administrator (or another program) from using the insmod program to load the module manually.

Rationale

USB storage devices such as thumb drives can be used to introduce malicious software.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'usb-storage' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/usb-storage.conf
    regexp: usb-storage
    line: install usb-storage /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.21
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - disable_strategy
  - kernel_module_usb-storage_disabled
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install usb-storage" /etc/modprobe.d/usb-storage.conf ; then
	
	sed -i 's#^install usb-storage.*#install usb-storage /bin/true#g' /etc/modprobe.d/usb-storage.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/usb-storage.conf
	echo "install usb-storage /bin/true" >> /etc/modprobe.d/usb-storage.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Add nodev Option to /dev/shmxccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev medium

Add nodev Option to /dev/shm

Rule IDxccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.7

Description

The nodev mount option can be used to prevent creation of device files in /dev/shm. Legitimate character and block devices should not exist within temporary directories like /dev/shm. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.

Rationale

The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.

Add noexec Option to /dev/shmxccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec medium

Add noexec Option to /dev/shm

Rule IDxccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.9

Description

The noexec mount option can be used to prevent binaries from being executed out of /dev/shm. It can be dangerous to allow the execution of binaries from world-writable temporary storage directories such as /dev/shm. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.

Rationale

Allowing users to execute binaries from world-writable directories such as /dev/shm can expose the system to potential compromise.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:high
Strategy:configure
- name: 'Add noexec Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: If /dev/shm not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Make sure noexec option is part of the to
    /dev/shm options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',noexec''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "noexec" not in mount_info.options
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Ensure /dev/shm is mounted with noexec option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if [ "$(grep -c "$mount_point_match_regexp" /etc/fstab)" -eq 0 ]; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif [ "$(grep "$mount_point_match_regexp" /etc/fstab | grep -c "noexec")" -eq 0 ]; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        else
            mount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Add nosuid Option to /dev/shmxccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid medium

Add nosuid Option to /dev/shm

Rule IDxccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.8

Description

The nosuid mount option can be used to prevent execution of setuid programs in /dev/shm. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.

Rationale

The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.

Disable Core Dumps for All Usersxccdf_org.ssgproject.content_rule_disable_users_coredumps medium

Disable Core Dumps for All Users

Rule IDxccdf_org.ssgproject.content_rule_disable_users_coredumps
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  1, 12, 13, 15, 16, 2, 7, 8, APO13.01, BAI04.04, DSS01.03, DSS03.05, DSS05.07, CCI-000366, SR 6.2, SR 7.1, SR 7.2, A.12.1.3, A.17.2.1, CM-6, SC-7(10), DE.CM-1, PR.DS-4, SRG-OS-000480-GPOS-00227, 1.6.4

Description

To disable core dumps for all users, add the following line to /etc/security/limits.conf, or to a file within the /etc/security/limits.d/ directory:

*     hard   core    0

Rationale

A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers trying to debug problems.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - disable_users_coredumps
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: disable core dumps with limits
  lineinfile:
    dest: /etc/security/limits.conf
    regexp: ^[^#].*core
    line: '*        hard       core      0'
    create: true
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - disable_users_coredumps
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

SECURITY_LIMITS_FILE="/etc/security/limits.conf"

if grep -qE '^\s*\*\s+hard\s+core' $SECURITY_LIMITS_FILE; then
        sed -ri 's/(hard\s+core\s+)[[:digit:]]+/\1 0/' $SECURITY_LIMITS_FILE
else
        echo "*     hard   core    0" >> $SECURITY_LIMITS_FILE
fi

if ls /etc/security/limits.d/*.conf > /dev/null; then
        sed -ri '/^\s*\*\s+hard\s+core/d' /etc/security/limits.d/*.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Core Dumps for SUID programsxccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable medium

Disable Core Dumps for SUID programs

Rule IDxccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R23), 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), SI-11(a), SI-11(b), 1.6.4

Description

To set the runtime status of the fs.suid_dumpable kernel parameter, run the following command:

$ sudo sysctl -w fs.suid_dumpable=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
fs.suid_dumpable = 0

Rationale

The core dump of a setuid program is more likely to contain sensitive data, as the program itself runs with greater privileges than the user who initiated execution of the program. Disabling the ability for any setuid program to write a core file decreases the risk of unauthorized access of such data.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*fs.suid_dumpable.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

- name: Comment out any occurrences of fs.suid_dumpable from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*fs.suid_dumpable
    replace: '#fs.suid_dumpable'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

- name: Ensure sysctl fs.suid_dumpable is set to 0
  sysctl:
    name: fs.suid_dumpable
    value: '0'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of fs.suid_dumpable from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*fs.suid_dumpable.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.suid_dumpable" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set runtime for fs.suid_dumpable
#
/sbin/sysctl -q -n -w fs.suid_dumpable="0"

#
# If fs.suid_dumpable present in /etc/sysctl.conf, change value to "0"
#	else, add "fs.suid_dumpable = 0" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.suid_dumpable")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.suid_dumpable\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^fs.suid_dumpable\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable Randomized Layout of Virtual Address Spacexccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space medium

Enable Randomized Layout of Virtual Address Space

Rule IDxccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R23), 3.1.7, CCI-000366, CCI-002824, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), CIP-002-5 R1.1, CIP-002-5 R1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 4.1, CIP-004-6 4.2, CIP-004-6 R2.2.3, CIP-004-6 R2.2.4, CIP-004-6 R2.3, CIP-004-6 R4, CIP-005-6 R1, CIP-005-6 R1.1, CIP-005-6 R1.2, CIP-007-3 R3, CIP-007-3 R3.1, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, CIP-007-3 R8.4, CIP-009-6 R.1.1, CIP-009-6 R4, SC-30, SC-30(2), CM-6(a), Req-2.2.1, SRG-OS-000433-GPOS-00193, SRG-OS-000480-GPOS-00227, UBTU-20-010448, 1.6.2

Description

To set the runtime status of the kernel.randomize_va_space kernel parameter, run the following command:

$ sudo sysctl -w kernel.randomize_va_space=2
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d:
kernel.randomize_va_space = 2

Rationale

Address space layout randomization (ASLR) makes it more difficult for an attacker to predict the location of attack code they have introduced into a process's address space during an attempt at exploitation. Additionally, ASLR makes it more difficult for an attacker to know the location of existing code in order to re-purpose it using return oriented programming (ROP) techniques.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*kernel.randomize_va_space.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010448
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Comment out any occurrences of kernel.randomize_va_space from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.randomize_va_space
    replace: '#kernel.randomize_va_space'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010448
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Ensure sysctl kernel.randomize_va_space is set to 2
  sysctl:
    name: kernel.randomize_va_space
    value: '2'
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010448
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space
Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.randomize_va_space from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.randomize_va_space.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.randomize_va_space" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set runtime for kernel.randomize_va_space
#
/sbin/sysctl -q -n -w kernel.randomize_va_space="2"

#
# If kernel.randomize_va_space present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.randomize_va_space = 2" to /etc/sysctl.conf
#
# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/sysctl.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.randomize_va_space")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.randomize_va_space\\>" "/etc/sysctl.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^kernel.randomize_va_space\\>.*/$escaped_formatted_output/gi" "/etc/sysctl.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/sysctl.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Avahi Server Softwarexccdf_org.ssgproject.content_rule_service_avahi-daemon_disabled medium

Disable Avahi Server Software

Rule IDxccdf_org.ssgproject.content_rule_service_avahi-daemon_disabled
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.3

Description

The avahi-daemon service can be disabled with the following command:

$ sudo systemctl mask --now avahi-daemon.service

Rationale

Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Its functionality is convenient but is only appropriate if the local network can be trusted.

Verify Group Who Owns /etc/at.allow filexccdf_org.ssgproject.content_rule_file_groupowner_at_allow medium

Verify Group Who Owns /etc/at.allow file

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_at_allow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  5.1.9

Description

If /etc/at.allow exists, it must be group-owned by root. To properly set the group owner of /etc/at.allow, run the command:

$ sudo chgrp root /etc/at.allow

Rationale

If the owner of the at.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.

Verify Group Who Owns /etc/cron.allow filexccdf_org.ssgproject.content_rule_file_groupowner_cron_allow medium

Verify Group Who Owns /etc/cron.allow file

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_allow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.8

Description

If /etc/cron.allow exists, it must be group-owned by root. To properly set the group owner of /etc/cron.allow, run the command:

$ sudo chgrp root /etc/cron.allow

Rationale

If the owner of the cron.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.

Verify User Who Owns /etc/at.allow filexccdf_org.ssgproject.content_rule_file_owner_at_allow medium

Verify User Who Owns /etc/at.allow file

Rule IDxccdf_org.ssgproject.content_rule_file_owner_at_allow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  5.1.9

Description

If /etc/at.allow exists, it must be owned by root. To properly set the owner of /etc/at.allow, run the command:

$ sudo chown root /etc/at.allow 

Rationale

If the owner of the at.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.

Verify User Who Owns /etc/cron.allow filexccdf_org.ssgproject.content_rule_file_owner_cron_allow medium

Verify User Who Owns /etc/cron.allow file

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_allow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.8

Description

If /etc/cron.allow exists, it must be owned by root. To properly set the owner of /etc/cron.allow, run the command:

$ sudo chown root /etc/cron.allow 

Rationale

If the owner of the cron.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.

Verify Permissions on /etc/at.allow filexccdf_org.ssgproject.content_rule_file_permissions_at_allow medium

Verify Permissions on /etc/at.allow file

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_at_allow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  5.1.9

Description

If /etc/at.allow exists, it must have permissions 0640 or more restrictive. To properly set the permissions of /etc/at.allow, run the command:

$ sudo chmod 0640 /etc/at.allow

Rationale

If the permissions of the at.allow file are not set to 0640 or more restrictive, the possibility exists for an unauthorized user to view or edit sensitive information.

Verify Permissions on /etc/cron.allow filexccdf_org.ssgproject.content_rule_file_permissions_cron_allow medium

Verify Permissions on /etc/cron.allow file

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_allow
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  SRG-OS-000480-GPOS-00227, 5.1.8

Description

If /etc/cron.allow exists, it must have permissions 0640 or more restrictive. To properly set the permissions of /etc/cron.allow, run the command:

$ sudo chmod 0640 /etc/cron.allow

Rationale

If the permissions of the cron.allow file are not set to 0640 or more restrictive, the possibility exists for an unauthorized user to view or edit sensitive information.

Enable cron Servicexccdf_org.ssgproject.content_rule_service_cron_enabled medium

Enable cron Service

Rule IDxccdf_org.ssgproject.content_rule_service_cron_enabled
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-6(a), PR.IP-1, PR.PT-3, 5.1.1

Description

The crond service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system activity. The cron service can be enabled with the following command:

$ sudo systemctl enable cron.service

Rationale

Due to its usage for maintenance and security-supporting tasks, enabling the cron daemon is essential.

Verify Group Who Owns cron.dxccdf_org.ssgproject.content_rule_file_groupowner_cron_d medium

Verify Group Who Owns cron.d

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_d
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.7

Description

To properly set the group owner of /etc/cron.d, run the command:

$ sudo chgrp root /etc/cron.d

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Verify Group Who Owns cron.dailyxccdf_org.ssgproject.content_rule_file_groupowner_cron_daily medium

Verify Group Who Owns cron.daily

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_daily
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.4

Description

To properly set the group owner of /etc/cron.daily, run the command:

$ sudo chgrp root /etc/cron.daily

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Verify Group Who Owns cron.hourlyxccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly medium

Verify Group Who Owns cron.hourly

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.3

Description

To properly set the group owner of /etc/cron.hourly, run the command:

$ sudo chgrp root /etc/cron.hourly

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Verify Group Who Owns cron.monthlyxccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly medium

Verify Group Who Owns cron.monthly

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.6

Description

To properly set the group owner of /etc/cron.monthly, run the command:

$ sudo chgrp root /etc/cron.monthly

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Verify Group Who Owns cron.weeklyxccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly medium

Verify Group Who Owns cron.weekly

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.5

Description

To properly set the group owner of /etc/cron.weekly, run the command:

$ sudo chgrp root /etc/cron.weekly

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Verify Group Who Owns Crontabxccdf_org.ssgproject.content_rule_file_groupowner_crontab medium

Verify Group Who Owns Crontab

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_crontab
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.2

Description

To properly set the group owner of /etc/crontab, run the command:

$ sudo chgrp root /etc/crontab

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Verify Owner on cron.dxccdf_org.ssgproject.content_rule_file_owner_cron_d medium

Verify Owner on cron.d

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_d
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.7

Description

To properly set the owner of /etc/cron.d, run the command:

$ sudo chown root /etc/cron.d 

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.

Verify Owner on cron.dailyxccdf_org.ssgproject.content_rule_file_owner_cron_daily medium

Verify Owner on cron.daily

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_daily
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.4

Description

To properly set the owner of /etc/cron.daily, run the command:

$ sudo chown root /etc/cron.daily 

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.

Verify Owner on cron.hourlyxccdf_org.ssgproject.content_rule_file_owner_cron_hourly medium

Verify Owner on cron.hourly

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_hourly
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.3

Description

To properly set the owner of /etc/cron.hourly, run the command:

$ sudo chown root /etc/cron.hourly 

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.

Verify Owner on cron.monthlyxccdf_org.ssgproject.content_rule_file_owner_cron_monthly medium

Verify Owner on cron.monthly

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_monthly
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.6

Description

To properly set the owner of /etc/cron.monthly, run the command:

$ sudo chown root /etc/cron.monthly 

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.

Verify Owner on cron.weeklyxccdf_org.ssgproject.content_rule_file_owner_cron_weekly medium

Verify Owner on cron.weekly

Rule IDxccdf_org.ssgproject.content_rule_file_owner_cron_weekly
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.5

Description

To properly set the owner of /etc/cron.weekly, run the command:

$ sudo chown root /etc/cron.weekly 

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.

Verify Owner on crontabxccdf_org.ssgproject.content_rule_file_owner_crontab medium

Verify Owner on crontab

Rule IDxccdf_org.ssgproject.content_rule_file_owner_crontab
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.2

Description

To properly set the owner of /etc/crontab, run the command:

$ sudo chown root /etc/crontab 

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.

Verify Permissions on cron.dxccdf_org.ssgproject.content_rule_file_permissions_cron_d medium

Verify Permissions on cron.d

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_d
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.7

Description

To properly set the permissions of /etc/cron.d, run the command:

$ sudo chmod 0700 /etc/cron.d

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.d/
  file:
    path: /etc/cron.d/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_cron_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.d/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Verify Permissions on cron.dailyxccdf_org.ssgproject.content_rule_file_permissions_cron_daily medium

Verify Permissions on cron.daily

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_daily
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.4

Description

To properly set the permissions of /etc/cron.daily, run the command:

$ sudo chmod 0700 /etc/cron.daily

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.daily/
  file:
    path: /etc/cron.daily/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_cron_daily
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.daily/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Verify Permissions on cron.hourlyxccdf_org.ssgproject.content_rule_file_permissions_cron_hourly medium

Verify Permissions on cron.hourly

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_hourly
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.3

Description

To properly set the permissions of /etc/cron.hourly, run the command:

$ sudo chmod 0700 /etc/cron.hourly

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.hourly/
  file:
    path: /etc/cron.hourly/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_cron_hourly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.hourly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Verify Permissions on cron.monthlyxccdf_org.ssgproject.content_rule_file_permissions_cron_monthly medium

Verify Permissions on cron.monthly

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_monthly
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.6

Description

To properly set the permissions of /etc/cron.monthly, run the command:

$ sudo chmod 0700 /etc/cron.monthly

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.monthly/
  file:
    path: /etc/cron.monthly/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_cron_monthly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.monthly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Verify Permissions on cron.weeklyxccdf_org.ssgproject.content_rule_file_permissions_cron_weekly medium

Verify Permissions on cron.weekly

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_cron_weekly
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.5

Description

To properly set the permissions of /etc/cron.weekly, run the command:

$ sudo chmod 0700 /etc/cron.weekly

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.weekly/
  file:
    path: /etc/cron.weekly/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_cron_weekly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.weekly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Verify Permissions on crontabxccdf_org.ssgproject.content_rule_file_permissions_crontab medium

Verify Permissions on crontab

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_crontab
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.2

Description

To properly set the permissions of /etc/crontab, run the command:

$ sudo chmod 0600 /etc/crontab

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/crontab
  stat:
    path: /etc/crontab
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /etc/crontab
  file:
    path: /etc/crontab
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xwrs,o-xwrt /etc/crontab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Uninstall the nis packagexccdf_org.ssgproject.content_rule_package_nis_removed low

Uninstall the nis package

Rule IDxccdf_org.ssgproject.content_rule_package_nis_removed
Result
pass
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  2.2.17

Description

The support for Yellowpages should not be installed unless it is required.

Rationale

NIS is the historical SUN service for central account management, more and more replaced by LDAP. NIS does not support efficiently security constraints, ACL, etc. and should not be used.

Uninstall DHCP Server Packagexccdf_org.ssgproject.content_rule_package_dhcp_removed medium

Uninstall DHCP Server Package

Rule IDxccdf_org.ssgproject.content_rule_package_dhcp_removed
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R1), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.5

Description

If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The isc-dhcp-server package can be removed with the following command:

$ apt-get remove isc-dhcp-server

Rationale

Removing the DHCP server ensures that it cannot be easily or accidentally reactivated and disrupt network operation.

Uninstall bind Packagexccdf_org.ssgproject.content_rule_package_bind_removed low

Uninstall bind Package

Rule IDxccdf_org.ssgproject.content_rule_package_bind_removed
Result
pass
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.8

Description

The named service is provided by the bind package. The bind package can be removed with the following command:

$ apt-get remove bind

Rationale

If there is no need to make DNS server software available, removing it provides a safeguard against its activation.

Uninstall vsftpd Packagexccdf_org.ssgproject.content_rule_package_vsftpd_removed high

Uninstall vsftpd Package

Rule IDxccdf_org.ssgproject.content_rule_package_vsftpd_removed
Result
pass
Time2023-03-25T10:36:35
Severityhigh
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000197, CCI-000366, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c), IA-5(1).1(v), CM-7, CM-7.1(ii), PR.IP-1, PR.PT-3, Req-2.2.4, SRG-OS-000074-GPOS-00042, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, 2.2.9

Description

The vsftpd package can be removed with the following command:

 $ apt-get remove vsftpd

Rationale

Removing the vsftpd package decreases the risk of its accidental activation.

Uninstall httpd Packagexccdf_org.ssgproject.content_rule_package_httpd_removed unknown

Uninstall httpd Package

Rule IDxccdf_org.ssgproject.content_rule_package_httpd_removed
Result
pass
Time2023-03-25T10:36:35
Severityunknown
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.10

Description

The apache2 package can be removed with the following command:

$ apt-get remove apache2

Rationale

If there is no need to make the web server software available, removing it provides a safeguard against its activation.

Uninstall dovecot Packagexccdf_org.ssgproject.content_rule_package_dovecot_removed unknown

Uninstall dovecot Package

Rule IDxccdf_org.ssgproject.content_rule_package_dovecot_removed
Result
pass
Time2023-03-25T10:36:35
Severityunknown
Identifiers and References

References:  2.2.11

Description

The dovecot-core package can be removed with the following command:

$ apt-get remove dovecot-core

Rationale

If there is no need to make the Dovecot software available, removing it provides a safeguard against its activation.

Ensure LDAP client is not installedxccdf_org.ssgproject.content_rule_package_openldap-clients_removed low

Ensure LDAP client is not installed

Rule IDxccdf_org.ssgproject.content_rule_package_openldap-clients_removed
Result
pass
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  Req-2.2.4, 2.3.5

Description

The Lightweight Directory Access Protocol (LDAP) is a service that provides a method for looking up information from a central database. The openldap-clients package can be removed with the following command:

$ apt-get remove openldap-clients

Rationale

If the system does not need to act as an LDAP client, it is recommended that the software is removed to reduce the potential attack surface.

Uninstall openldap-servers Packagexccdf_org.ssgproject.content_rule_package_openldap-servers_removed low

Uninstall openldap-servers Package

Rule IDxccdf_org.ssgproject.content_rule_package_openldap-servers_removed
Result
pass
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.6

Description

The slapd package is not installed by default on a Ubuntu 20.04 system. It is needed only by the OpenLDAP server, not by the clients which use LDAP for authentication. If the system is not intended for use as an LDAP Server it should be removed.

Rationale

Unnecessary packages should not be installed to decrease the attack surface of the system. While this software is clearly essential on an LDAP server, it is not necessary on typical desktop or workstation systems.

Uninstall rpcbind Packagexccdf_org.ssgproject.content_rule_package_rpcbind_removed low

Uninstall rpcbind Package

Rule IDxccdf_org.ssgproject.content_rule_package_rpcbind_removed
Result
pass
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  2.3.6

Description

The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they are listening on and the RPC program numbers they expect to serve. The rpcbind service redirects the client to the proper port number so it can communicate with the requested service. If the system does not require RPC (such as for NFS servers) then this service should be disabled. The rpcbind package can be removed with the following command:

$ apt-get remove rpcbind

Rationale

If the system does not require rpc based services, it is recommended that rpcbind be disabled to reduce the attack surface.

The Chrony package is installedxccdf_org.ssgproject.content_rule_package_chrony_installed medium

The Chrony package is installed

Rule IDxccdf_org.ssgproject.content_rule_package_chrony_installed
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R43), 0988, 1405, FMT_SMF_EXT.1, Req-10.6.1, SRG-OS-000355-GPOS-00143, UBTU-20-010435, 2.2.1.1

Description

System time should be synchronized between all systems in an environment. This is typically done by establishing an authoritative time server or set of servers and having all systems synchronize their clocks to them. The chrony package can be installed with the following command:

$ apt-get install chrony

Rationale

Time synchronization is important to support time sensitive security mechanisms like Kerberos and also ensures log files have consistent time records across the enterprise, which aids in forensic investigations.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_chrony

class install_chrony {
  package { 'chrony':
    ensure => 'installed',
  }
}
Remediation script:   (show)


[[packages]]
name = "chrony"
version = "*"
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure chrony is installed
  package:
    name: chrony
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010435
  - PCI-DSS-Req-10.6.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_chrony_installed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "chrony"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Install the ntp servicexccdf_org.ssgproject.content_rule_package_ntp_installed high

Install the ntp service

Rule IDxccdf_org.ssgproject.content_rule_package_ntp_installed
Result
fail
Time2023-03-25T10:36:35
Severityhigh
Identifiers and References

References:  NT012(R03), 1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-000160, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), PR.PT-1, Req-10.4, 2.2.1.4

Description

The ntpd service should be installed.

Rationale

Time synchronization (using NTP) is required by almost all network and administrative tasks (syslog, cryptographic based services (authentication, etc.), etc.). Ntpd is regulary maintained and updated, supporting security features such as RFC 5906.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_ntp

class install_ntp {
  package { 'ntp':
    ensure => 'installed',
  }
}
Remediation script:   (show)


[[packages]]
name = "ntp"
version = "*"
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure ntp is installed
  package:
    name: ntp
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4
  - enable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_ntp_installed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "ntp"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Enable the NTP Daemonxccdf_org.ssgproject.content_rule_service_chronyd_or_ntpd_enabled medium

Enable the NTP Daemon

Rule IDxccdf_org.ssgproject.content_rule_service_chronyd_or_ntpd_enabled
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, 3.3.7, CCI-000160, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, 0988, 1405, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), AU-8(1)(a), AU-12(1), PR.PT-1, Req-10.4.1, SRG-OS-000356-VMM-001340, 2.2.1.1

Description

Run the following command to determine the current status of the chronyd service:

$ sudo systemctl is-active chronyd
If the service is running, it should return the following:
active
Note: The chronyd daemon is enabled by default.

Run the following command to determine the current status of the ntpd service:
$ sudo systemctl is-active ntpd
If the service is running, it should return the following:
active
Note: The ntpd daemon is not enabled by default. Though as mentioned in the previous sections in certain environments the ntpd daemon might be preferred to be used rather than the chronyd one. Refer to: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/system_administrators_guide/ch-configuring_ntp_using_the_chrony_suite for guidance which NTP daemon to choose depending on the environment used.

Rationale

Enabling some of chronyd or ntpd services ensures that the NTP daemon will be running and that the system will synchronize its time to any servers specified. This is important whether the system is configured to be a client (and synchronize only its own clock) or it is also acting as an NTP server to other systems. Synchronizing time is essential for authentication services such as Kerberos, but it is also important for maintaining accurate logs and auditing possible security breaches.

The chronyd and ntpd NTP daemons offer all of the functionality of ntpdate, which is now deprecated.

Enable the NTP Daemonxccdf_org.ssgproject.content_rule_service_ntp_enabled high

Enable the NTP Daemon

Rule IDxccdf_org.ssgproject.content_rule_service_ntp_enabled
Result
fail
Time2023-03-25T10:36:35
Severityhigh
Identifiers and References

References:  NT012(R03), 1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-000160, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), AU-8(1)(a), PR.PT-1, Req-10.4, 2.2.1.4

Description

The ntp service can be enabled with the following command:

$ sudo systemctl enable ntp.service

Rationale

Enabling the ntp service ensures that the ntp service will be running and that the system will synchronize its time to any servers specified. This is important whether the system is configured to be a client (and synchronize only its own clock) or it is also acting as an NTP server to other systems. Synchronizing time is essential for authentication services such as Kerberos, but it is also important for maintaining accurate logs and auditing possible security breaches.

The NTP daemon offers all of the functionality of ntpdate, which is now deprecated.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include enable_ntp

class enable_ntp {
  service {'ntp':
    enable => true,
    ensure => 'running',
  }
}
Remediation script:   (show)


[customizations.services]
enabled = ["ntp"]
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service ntp
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service ntp
    service:
      name: ntp
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"ntp" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4
  - enable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_ntp_enabled
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'ntp.service'
"$SYSTEMCTL_EXEC" start 'ntp.service'
"$SYSTEMCTL_EXEC" enable 'ntp.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Ensure that chronyd is running under chrony user accountxccdf_org.ssgproject.content_rule_chronyd_run_as_chrony_user medium

Ensure that chronyd is running under chrony user account

Rule IDxccdf_org.ssgproject.content_rule_chronyd_run_as_chrony_user
Result
notapplicable
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  2.2.1.3

Description

chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at http://chrony.tuxfamily.org/. Chrony can be configured to be a client and/or a server. To ensure that chronyd is running under chrony user account, user variable in /etc/chrony/chrony.conf is set to _chrony or is absent:

user _chrony
This recommendation only applies if chrony is in use on the system.

Rationale

If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.

A remote time server for Chrony is configuredxccdf_org.ssgproject.content_rule_chronyd_specify_remote_server medium

A remote time server for Chrony is configured

Rule IDxccdf_org.ssgproject.content_rule_chronyd_specify_remote_server
Result
notapplicable
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R43), CCI-000160, CCI-001891, 0988, 1405, CM-6(a), AU-8(1)(a), Req-10.4.3, 2.2.1.3

Description

Chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at http://chrony.tuxfamily.org/. Chrony can be configured to be a client and/or a server. Add or edit server or pool lines to /etc/chrony/chrony.conf as appropriate:

server <remote-server>
Multiple servers may be configured.

Rationale

If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.

Uninstall xinetd Packagexccdf_org.ssgproject.content_rule_package_xinetd_removed low

Uninstall xinetd Package

Rule IDxccdf_org.ssgproject.content_rule_package_xinetd_removed
Result
pass
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000305, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, 2.1.1

Description

The xinetd package can be removed with the following command:

$ apt-get remove xinetd

Rationale

Removing the xinetd package decreases the risk of the xinetd service's accidental (or intentional) activation.

Uninstall rsh Packagexccdf_org.ssgproject.content_rule_package_rsh_removed unknown

Uninstall rsh Package

Rule IDxccdf_org.ssgproject.content_rule_package_rsh_removed
Result
pass
Time2023-03-25T10:36:35
Severityunknown
Identifiers and References

References:  BP28(R1), 3.1.13, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), A.8.2.3, A.13.1.1, A.13.2.1, A.13.2.3, A.14.1.2, A.14.1.3, 2.3.2

Description

The rsh-client package contains the client commands for the rsh services

Rationale

These legacy clients contain numerous security exposures and have been replaced with the more secure SSH package. Even if the server is removed, it is best to ensure the clients are also removed to prevent users from inadvertently attempting to use these commands and therefore exposing their credentials. Note that removing the rsh-client package removes the clients for rsh,rcp, and rlogin.

Remove Rsh Trust Filesxccdf_org.ssgproject.content_rule_no_rsh_trust_files high

Remove Rsh Trust Files

Rule IDxccdf_org.ssgproject.content_rule_no_rsh_trust_files
Result
pass
Time2023-03-25T10:36:35
Severityhigh
Identifiers and References

References:  11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-001436, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, 6.2.11

Description

The files /etc/hosts.equiv and ~/.rhosts (in each user's home directory) list remote hosts and users that are trusted by the local system when using the rshd daemon. To remove these files, run the following command to delete them from any location:

$ sudo rm /etc/hosts.equiv
$ rm ~/.rhosts

Rationale

This action is only meaningful if .rhosts support is permitted through PAM. Trust files are convenient, but when used in conjunction with the R-services, they can allow unauthenticated access to a system.

Uninstall talk Packagexccdf_org.ssgproject.content_rule_package_talk_removed medium

Uninstall talk Package

Rule IDxccdf_org.ssgproject.content_rule_package_talk_removed
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R1), 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 2.3.3

Description

The talk package contains the client program for the Internet talk protocol, which allows the user to chat with other users on different systems. Talk is a communication program which copies lines from one terminal to the terminal of another user. The talk package can be removed with the following command:

$ apt-get remove talk

Rationale

The talk software presents a security risk as it uses unencrypted protocols for communications. Removing the talk package decreases the risk of the accidental (or intentional) activation of talk client program.

Remove telnet Clientsxccdf_org.ssgproject.content_rule_package_telnet_removed low

Remove telnet Clients

Rule IDxccdf_org.ssgproject.content_rule_package_telnet_removed
Result
fail
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  BP28(R1), 3.1.13, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), A.8.2.3, A.13.1.1, A.13.2.1, A.13.2.3, A.14.1.2, A.14.1.3, 2.3.4

Description

The telnet client allows users to start connections to other systems via the telnet protocol.

Rationale

The telnet protocol is insecure and unencrypted. The use of an unencrypted transmission medium could allow an unauthorized user to steal credentials. The ssh package provides an encrypted session and stronger security and is included in Ubuntu 20.04.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_telnet

class remove_telnet {
  package { 'telnet':
    ensure => 'purged',
  }
}
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure telnet is removed
  package:
    name: telnet
    state: absent
  tags:
  - NIST-800-171-3.1.13
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_telnet_removed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove telnet
#	   from the system, and may remove any packages
#	   that depend on telnet. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "telnet"
Uninstall rsync Packagexccdf_org.ssgproject.content_rule_package_rsync_removed medium

Uninstall rsync Package

Rule IDxccdf_org.ssgproject.content_rule_package_rsync_removed
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  2.2.16

Description

The rsyncd service can be used to synchronize files between systems over network links. The rsync package can be removed with the following command:

$ apt-get remove rsync

Rationale

The rsyncd service presents a security risk as it uses unencrypted protocols for communication.

Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_rsync

class remove_rsync {
  package { 'rsync':
    ensure => 'purged',
  }
}
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure rsync is removed
  package:
    name: rsync
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_rsync_removed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove rsync
#	   from the system, and may remove any packages
#	   that depend on rsync. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "rsync"
Uninstall CUPS Packagexccdf_org.ssgproject.content_rule_package_cups_removed unknown

Uninstall CUPS Package

Rule IDxccdf_org.ssgproject.content_rule_package_cups_removed
Result
pass
Time2023-03-25T10:36:35
Severityunknown
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4

Description

The cups package can be removed with the following command:

$ apt-get remove cups

Rationale

If the system does not need to print jobs or accept print jobs from other systems, it is recommended that CUPS be removed to reduce the potential attack surface.

Disable the CUPS Servicexccdf_org.ssgproject.content_rule_service_cups_disabled unknown

Disable the CUPS Service

Rule IDxccdf_org.ssgproject.content_rule_service_cups_disabled
Result
pass
Time2023-03-25T10:36:35
Severityunknown
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4

Description

The cups service can be disabled with the following command:

$ sudo systemctl mask --now cups.service

Rationale

Turn off unneeded services to reduce attack surface.

Uninstall squid Packagexccdf_org.ssgproject.content_rule_package_squid_removed unknown

Uninstall squid Package

Rule IDxccdf_org.ssgproject.content_rule_package_squid_removed
Result
pass
Time2023-03-25T10:36:35
Severityunknown
Identifiers and References

References:  2.2.13

Description

The squid package can be removed with the following command:

 $ apt-get remove squid

Rationale

If there is no need to make the proxy server software available, removing it provides a safeguard against its activation.

Uninstall Samba Packagexccdf_org.ssgproject.content_rule_package_samba_removed unknown

Uninstall Samba Package

Rule IDxccdf_org.ssgproject.content_rule_package_samba_removed
Result
pass
Time2023-03-25T10:36:35
Severityunknown
Identifiers and References

References:  2.2.12

Description

The samba package can be removed with the following command:

 $ apt-get remove samba

Rationale

If there is no need to make the Samba software available, removing it provides a safeguard against its activation.

Uninstall net-snmp Packagexccdf_org.ssgproject.content_rule_package_net-snmp_removed unknown

Uninstall net-snmp Package

Rule IDxccdf_org.ssgproject.content_rule_package_net-snmp_removed
Result
pass
Time2023-03-25T10:36:35
Severityunknown
Identifiers and References

References:  2.2.14

Description

The snmp package provides the snmpd service. The snmp package can be removed with the following command:

$ apt-get remove snmp

Rationale

If there is no need to run SNMP server software, removing the package provides a safeguard against its activation.

Set SSH Client Alive Count Maxxccdf_org.ssgproject.content_rule_sshd_set_keepalive medium

Set SSH Client Alive Count Max

Rule IDxccdf_org.ssgproject.content_rule_sshd_set_keepalive
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R29), 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, 5.5.6, APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.11, CCI-000879, CCI-001133, CCI-002361, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-2(5), AC-12, AC-17(a), SC-10, CM-6(a), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2, Req-8.1.8, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, SRG-OS-000480-VMM-002000, UBTU-20-010036, 5.2.15

Description

The SSH server sends at most ClientAliveCountMax messages during a SSH session and waits for a response from the SSH client. The option ClientAliveInterval configures timeout after each ClientAliveCountMax message. If the SSH server does not receive a response from the client, then the connection is considered unresponsive and terminated. For SSH earlier than v8.2, a ClientAliveCountMax value of 0 causes a timeout precisely when the ClientAliveInterval is set. Starting with v8.2, a value of 0 disables the timeout functionality completely. If the option is set to a number greater than 0, then the session will be disconnected after ClientAliveInterval * ClientAliveCountMax seconds without receiving a keep alive message.

Rationale

This ensures a user login will be terminated as soon as the ClientAliveInterval is reached.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_sshd_set_keepalive # promote to variable
  set_fact:
    var_sshd_set_keepalive: !!str 3
  tags:
    - always

- name: Set SSH Client Alive Count Max
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*ClientAliveCountMax\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*ClientAliveCountMax\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveCountMax\s+
      line: ClientAliveCountMax {{ var_sshd_set_keepalive }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010036
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_keepalive
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_set_keepalive='3'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Set SSH Client Alive Intervalxccdf_org.ssgproject.content_rule_sshd_set_idle_timeout medium

Set SSH Client Alive Interval

Rule IDxccdf_org.ssgproject.content_rule_sshd_set_idle_timeout
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R29), 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, 5.5.6, APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.11, CCI-000879, CCI-001133, CCI-002361, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, CM-6(a), AC-17(a), AC-2(5), AC-12, AC-17(a), SC-10, CM-6(a), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2, Req-8.1.8, SRG-OS-000126-GPOS-00066, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, SRG-OS-000395-GPOS-00175, SRG-OS-000480-VMM-002000, UBTU-20-010037, 5.2.15

Description

SSH allows administrators to set a network responsiveness timeout interval. After this interval has passed, the unresponsive client will be automatically logged out.

To set this timeout interval, edit the following line in /etc/ssh/sshd_config as follows:

ClientAliveInterval 300


The timeout interval is given in seconds. For example, have a timeout of 10 minutes, set interval to 600.

If a shorter timeout has already been set for the login shell, that value will preempt any SSH setting made in /etc/ssh/sshd_config. Keep in mind that some processes may stop SSH from correctly detecting that the user is idle.

Rationale

Terminating an idle ssh session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been let unattended.

Warnings
warning  SSH disconnecting unresponsive clients will not have desired effect without also configuring ClientAliveCountMax in the SSH service configuration.
warning  Following conditions may prevent the SSH session to time out:
  • Remote processes on the remote machine generates output. As the output has to be transferred over the network to the client, the timeout is reset every time such transfer happens.
  • Any scp or sftp activity by the same user to the host resets the timeout.
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_idle_timeout_value='300'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveInterval\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable Host-Based Authenticationxccdf_org.ssgproject.content_rule_disable_host_auth medium

Disable Host-Based Authentication

Rule IDxccdf_org.ssgproject.content_rule_disable_host_auth
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 12, 14, 15, 16, 18, 3, 5, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-3, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3, FIA_UAU.1, SRG-OS-000480-GPOS-00229, SRG-OS-000480-VMM-002000, 5.2.8

Description

SSH's cryptographic host-based authentication is more secure than .rhosts authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organization.
The default SSH configuration disables host-based authentication. The appropriate configuration is used if no value is set for HostbasedAuthentication.
To explicitly disable host-based authentication, add or correct the following line in /etc/ssh/sshd_config:

HostbasedAuthentication no

Rationale

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable Host-Based Authentication
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*HostbasedAuthentication\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*HostbasedAuthentication\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*HostbasedAuthentication\s+
      line: HostbasedAuthentication no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_host_auth
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "HostbasedAuthentication no" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "HostbasedAuthentication no" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable SSH Access via Empty Passwordsxccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords high

Disable SSH Access via Empty Passwords

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords
Result
fail
Time2023-03-25T10:36:35
Severityhigh
Identifiers and References

References:  NT007(R17), 11, 12, 13, 14, 15, 16, 18, 3, 5, 9, 5.5.6, APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, 3.1.1, 3.1.5, CCI-000366, CCI-000766, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3, FIA_UAU.1, Req-2.2.6, SRG-OS-000106-GPOS-00053, SRG-OS-000480-GPOS-00229, SRG-OS-000480-GPOS-00227, SRG-OS-000480-VMM-002000, UBTU-20-010047, 5.2.10

Description

Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used if no value is set for PermitEmptyPasswords.
To explicitly disallow SSH login from accounts with empty passwords, add or correct the following line in /etc/ssh/sshd_config:

PermitEmptyPasswords no
Any accounts with empty passwords should be disabled immediately, and PAM configuration should prevent users from being able to assign themselves empty passwords.

Rationale

Configuring this setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Access via Empty Passwords
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      line: PermitEmptyPasswords no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010047
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-2.2.6
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_empty_passwords
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "PermitEmptyPasswords no" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "PermitEmptyPasswords no" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Disable SSH Support for .rhosts Filesxccdf_org.ssgproject.content_rule_sshd_disable_rhosts medium

Disable SSH Support for .rhosts Files

Rule IDxccdf_org.ssgproject.content_rule_sshd_disable_rhosts
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 12, 14, 15, 16, 18, 3, 5, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3, FIA_UAU.1, SRG-OS-000480-GPOS-00227, SRG-OS-000107-VMM-000530, 5.2.7

Description

SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via .rhosts files.
The default SSH configuration disables support for .rhosts. The appropriate configuration is used if no value is set for IgnoreRhosts.
To explicitly disable support for .rhosts files, add or correct the following line in /etc/ssh/sshd_config:

IgnoreRhosts yes

Rationale

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Support for .rhosts Files
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*IgnoreRhosts\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*IgnoreRhosts\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*IgnoreRhosts\s+
      line: IgnoreRhosts yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_rhosts
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "IgnoreRhosts yes" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "IgnoreRhosts yes" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Do Not Allow SSH Environment Optionsxccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env medium

Do Not Allow SSH Environment Options

Rule IDxccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  11, 3, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.IP-1, Req-2.2.6, SRG-OS-000480-GPOS-00229, SRG-OS-000480-VMM-002000, UBTU-20-010047, 5.2.11

Description

Ensure that users are not able to override environment variables of the SSH daemon.
The default SSH configuration disables environment processing. The appropriate configuration is used if no value is set for PermitUserEnvironment.
To explicitly disable Environment options, add or correct the following /etc/ssh/sshd_config:

PermitUserEnvironment no

Rationale

SSH environment options potentially allow users to bypass access restriction in some configurations.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Do Not Allow SSH Environment Options
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*PermitUserEnvironment\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*PermitUserEnvironment\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitUserEnvironment\s+
      line: PermitUserEnvironment no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010047
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_do_not_permit_user_env
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "PermitUserEnvironment no" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "PermitUserEnvironment no" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Set LogLevel to INFOxccdf_org.ssgproject.content_rule_sshd_set_loglevel_info low

Set LogLevel to INFO

Rule IDxccdf_org.ssgproject.content_rule_sshd_set_loglevel_info
Result
fail
Time2023-03-25T10:36:35
Severitylow
Identifiers and References

References:  AC-17(a), CM-6(a), 5.2.4

Description

The INFO parameter specifices that record login and logout activity will be logged.
The default SSH configuration sets the log level to INFO. The appropriate configuration is used if no value is set for LogLevel.
To explicitly specify the log level in SSH, add or correct the following line in /etc/ssh/sshd_config:

LogLevel INFO

Rationale

SSH provides several logging levels with varying amounts of verbosity. DEBUG is specifically not recommended other than strictly for debugging SSH communications since it provides so much data that it is difficult to identify important security information. INFO level is the basic level that only records login activity of SSH users. In many situations, such as Incident Response, it is important to determine when a particular user was active on a system. The logout record can eliminate those users who disconnected, which helps narrow the field.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Set LogLevel to INFO
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*LogLevel\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*LogLevel\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*LogLevel\s+
      line: LogLevel INFO
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_loglevel_info
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "LogLevel INFO" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "LogLevel INFO" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Set SSH authentication attempt limitxccdf_org.ssgproject.content_rule_sshd_set_max_auth_tries medium

Set SSH authentication attempt limit

Rule IDxccdf_org.ssgproject.content_rule_sshd_set_max_auth_tries
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, 5.2.6

Description

The MaxAuthTries parameter specifies the maximum number of authentication attempts permitted per connection. Once the number of failures reaches half this value, additional failures are logged. to set MaxAUthTries edit /etc/ssh/sshd_config as follows:

MaxAuthTries 4

Rationale

Setting the MaxAuthTries parameter to a low number will minimize the risk of successful brute force attacks to the SSH server.

Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_max_auth_tries_value='4'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxAuthTries\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "MaxAuthTries $sshd_max_auth_tries_value" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "MaxAuthTries $sshd_max_auth_tries_value" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Set SSH MaxSessions limitxccdf_org.ssgproject.content_rule_sshd_set_max_sessions medium

Set SSH MaxSessions limit

Rule IDxccdf_org.ssgproject.content_rule_sshd_set_max_sessions
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  5.2.22

Description

The MaxSessions parameter specifies the maximum number of open sessions permitted from a given connection. To set MaxSessions edit /etc/ssh/sshd_config as follows:

MaxSessions 10

Rationale

To protect a system from denial of service due to a large number of concurrent sessions, use the rate limiting function of MaxSessions to protect availability of sshd logins and prevent overwhelming the daemon.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: XCCDF Value var_sshd_max_sessions # promote to variable
  set_fact:
    var_sshd_max_sessions: !!str 10
  tags:
    - always

- name: Set SSH MaxSessions limit
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*MaxSessions\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*MaxSessions\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxSessions\s+
      line: MaxSessions {{ var_sshd_max_sessions }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - sshd_set_max_sessions
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_max_sessions='10'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxSessions\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "MaxSessions $var_sshd_max_sessions" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "MaxSessions $var_sshd_max_sessions" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Use Only FIPS 140-2 Validated Ciphersxccdf_org.ssgproject.content_rule_sshd_use_approved_ciphers medium

Use Only FIPS 140-2 Validated Ciphers

Rule IDxccdf_org.ssgproject.content_rule_sshd_use_approved_ciphers
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, 6, 8, 9, 5.5.6, APO11.04, APO13.01, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, MEA02.01, 3.1.13, 3.13.11, 3.13.8, CCI-000068, CCI-000366, CCI-000803, CCI-000877, CCI-002890, CCI-003123, 164.308(b)(1), 164.308(b)(2), 164.312(e)(1), 164.312(e)(2)(i), 164.312(e)(2)(ii), 164.314(b)(2)(i), 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.18.1.4, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), AC-17(a), AC-17(2), SC-13, MA-4(6), IA-5(1)(c), SC-12(2), SC-12(3), PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-1, PR.PT-1, PR.PT-3, PR.PT-4, SRG-OS-000033-GPOS-00014, SRG-OS-000120-GPOS-00061, SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174, SRG-OS-000033-VMM-000140, SRG-OS-000120-VMM-000600, SRG-OS-000478-VMM-001980, SRG-OS-000396-VMM-001590, 5.2.12

Description

Limit the ciphers to those algorithms which are FIPS-approved. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved ciphers:

Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
The man page sshd_config(5) contains a list of supported ciphers. The rule is parametrized to use the following ciphers: aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se.

Rationale

Unapproved mechanisms that are used for authentication to the cryptographic module are not verified and therefore cannot be relied upon to provide confidentiality or integrity, and system data may be compromised.
Operating systems utilizing encryption are required to use FIPS-compliant mechanisms for authenticating to cryptographic modules.
FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on Ubuntu 20.04.

Warnings
warning  The system needs to be rebooted for these changes to take effect.
warning  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_approved_ciphers='aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/ssh/sshd_config"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^Ciphers")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_approved_ciphers"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^Ciphers\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^Ciphers\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Use Only FIPS 140-2 Validated MACsxccdf_org.ssgproject.content_rule_sshd_use_approved_macs medium

Use Only FIPS 140-2 Validated MACs

Rule IDxccdf_org.ssgproject.content_rule_sshd_use_approved_macs
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  1, 12, 13, 15, 16, 5, 8, APO01.06, APO13.01, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.07, DSS06.02, DSS06.03, 3.1.13, 3.13.11, 3.13.8, CCI-000068, CCI-000803, CCI-000877, CCI-001453, CCI-003123, 164.308(b)(1), 164.308(b)(2), 164.312(e)(1), 164.312(e)(2)(i), 164.312(e)(2)(ii), 164.314(b)(2)(i), 4.3.3.5.1, 4.3.3.6.6, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.11.2.6, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), AC-17(a), AC-17(2), SC-13, MA-4(6), SC-12(2), SC-12(3), PR.AC-1, PR.AC-3, PR.DS-5, PR.PT-4, SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000394-GPOS-00174, SRG-OS-000033-VMM-000140, SRG-OS-000120-VMM-000600, SRG-OS-000478-VMM-001980, SRG-OS-000480-VMM-002000, SRG-OS-000396-VMM-001590, 5.2.13

Description

Limit the MACs to those hash algorithms which are FIPS-approved. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved MACs:

MACs hmac-sha2-512,hmac-sha2-256,hmac-sha1
The man page sshd_config(5) contains a list of supported MACs. The rule is parametrized to use the following MACs: hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-sha1-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com.

Rationale

DoD Information Systems are required to use FIPS-approved cryptographic hash functions. The only SSHv2 hash algorithms meeting this requirement is SHA2.

Warnings
warning  The system needs to be rebooted for these changes to take effect.
warning  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Remediation Shell script:   (show)

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_approved_macs='hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-sha1-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/ssh/sshd_config"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^MACs")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_approved_macs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^MACs\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    "${sed_command[@]}" "s/^MACs\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Verify Group Who Owns SSH Server config filexccdf_org.ssgproject.content_rule_file_groupowner_sshd_config medium

Verify Group Who Owns SSH Server config file

Rule IDxccdf_org.ssgproject.content_rule_file_groupowner_sshd_config
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.2.1

Description

To properly set the group owner of /etc/ssh/sshd_config, run the command:

$ sudo chgrp root /etc/ssh/sshd_config

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Verify Owner on SSH Server config filexccdf_org.ssgproject.content_rule_file_owner_sshd_config medium

Verify Owner on SSH Server config file

Rule IDxccdf_org.ssgproject.content_rule_file_owner_sshd_config
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.2.1

Description

To properly set the owner of /etc/ssh/sshd_config, run the command:

$ sudo chown root /etc/ssh/sshd_config 

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Verify Permissions on SSH Server config filexccdf_org.ssgproject.content_rule_file_permissions_sshd_config medium

Verify Permissions on SSH Server config file

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_sshd_config
Result
fail
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.2.1

Description

To properly set the permissions of /etc/ssh/sshd_config, run the command:

$ sudo chmod 0600 /etc/ssh/sshd_config

Rationale

Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/ssh/sshd_config
  stat:
    path: /etc/ssh/sshd_config
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /etc/ssh/sshd_config
  file:
    path: /etc/ssh/sshd_config
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xwrs,o-xwrt /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Verify Permissions on SSH Server Private *_key Key Filesxccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key medium

Verify Permissions on SSH Server Private *_key Key Files

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.13, 3.13.10, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-2.2.6, SRG-OS-000480-GPOS-00227, 5.2.2

Description

SSH server private keys - files that match the /etc/ssh/*_key glob, have to have restricted permissions. If those files are owned by the root user and the root group, they have to have the 0600 permission or stricter.

Rationale

If an unauthorized user obtains the private SSH host key file, the host could be impersonated.

Verify Permissions on SSH Server Public *.pub Key Filesxccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key medium

Verify Permissions on SSH Server Public *.pub Key Files

Rule IDxccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.13, 3.13.10, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-2.2.6, SRG-OS-000480-GPOS-00227, 5.2.3

Description

To properly set the permissions of /etc/ssh/*.pub, run the command:

$ sudo chmod 0644 /etc/ssh/*.pub

Rationale

If a public host key file is modified by an unauthorized user, the SSH service may be compromised.

Remove the X Windows Package Groupxccdf_org.ssgproject.content_rule_package_xorg-x11-server-common_removed medium

Remove the X Windows Package Group

Rule IDxccdf_org.ssgproject.content_rule_package_xorg-x11-server-common_removed
Result
pass
Time2023-03-25T10:36:35
Severitymedium
Identifiers and References

References:  12, 15, 8, APO13.01, DSS01.04, DSS05.02, DSS05.03, CCI-000366, 4.3.3.6.6, SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.6.2.1, A.6.2.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 2.2.2

Description

By removing the xorg-x11-server-common package, the system no longer has X Windows installed. If X Windows is not installed then the system cannot boot into graphical user mode. This prevents the system from being accidentally or maliciously booted into a graphical.target mode. To do so, run the following command:

$ sudo apt_get groupremove "X Window System"
$ sudo apt_get remove xorg-x11-server-common

Rationale

Unnecessary service packages must not be installed to decrease the attack surface of the system. X windows has a long history of security vulnerabilities and should not be installed unless approved and documented.

Warnings
warning  The installation and use of a Graphical User Interface (GUI) increases your attack vector and decreases your overall security posture. Removing the package xorg-x11-server-common package will remove the graphical target which might bring your system to an inconsistent state requiring additional configuration to access the system again. If a GUI is an operational requirement, a tailored profile that removes this rule should used before continuing installation.
Red Hat and Red Hat Enterprise Linux are either registered trademarks or trademarks of Red Hat, Inc. in the United States and other countries. All other names are registered trademarks or trademarks of their respective companies.